{"product_id":"12v-led-driver-for-led-stair-nosing-tape","title":"12V LED Driver for LED Stair Nosing Tape, 8W to 180W, Six-Port","description":"\u003cp\u003eThis 12V LED driver powers the \u003ca href=\"\/products\/natural-white-led-tape-12v-for-led-stair-nosings\"\u003enatural white LED tape\u003c\/a\u003e in our \u003ca href=\"\/products\/light-down-led-tile-in-stair-nosing-2-8m-matt-silver\"\u003elight-down LED tile-in stair nosing\u003c\/a\u003e. It converts the mains supply to the steady 12V the tape needs and feeds up to six tape runs through its distribution block, so every lit step on a staircase can be powered from one neat unit. Choose from 8W for a single step up to 180W for a large staircase. It is the standard driver for a simple installation switched from a wall switch or a motion sensor, and is fitted by the electrician on a tiled lit staircase project.\u003c\/p\u003e\n\n\u003ch3\u003eWhy it works\u003c\/h3\u003e\n\u003ch4\u003eMatched to the tape\u003c\/h4\u003e\n\u003cp\u003eThe tape is designed for 12V. Running it from a 12V driver sized to the tape gives the steady supply it needs, which keeps the light even along every riser.\u003c\/p\u003e\n\u003ch4\u003eSix ports, one unit\u003c\/h4\u003e\n\u003cp\u003eThe driver's distribution block has six ports, so up to six reels of tape, one per step, plug straight in with no soldering, keeping the wiring tidy and easy to trace. For a longer staircase, add an \u003ca href=\"\/products\/extra-port-connector-block-for-led-stair-lighting\"\u003eextra-port connector block\u003c\/a\u003e (one block takes the driver to nine ports, two to twelve) or use one driver per group of six steps.\u003c\/p\u003e\n\u003ch4\u003eSimple control\u003c\/h4\u003e\n\u003cp\u003eThis standard driver is designed for straightforward on-off operation: from a wall switch, or from a \u003ca href=\"\/products\/pir-motion-sensor-for-led-stair-lighting\"\u003ePIR motion sensor\u003c\/a\u003e so the stairs light up as someone approaches. To dim the stairs from a remote, use the \u003ca href=\"\/products\/remote-ready-12v-led-driver-for-dimmable-tunable-rgb-stair-lighting\"\u003eremote-ready 12V LED driver\u003c\/a\u003e with the natural white \u003ca href=\"\/products\/single-zone-remote-dimmer-controller-for-led-stair-lighting\"\u003esingle-zone remote\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12V DC output for the natural white LED tape\u003c\/li\u003e\n\u003cli\u003e8W, 30W, 50W, 100W or 180W\u003c\/li\u003e\n\u003cli\u003eDistribution block with six ports\u003c\/li\u003e\n\u003cli\u003eWall switch or motion sensor operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere it's used\u003c\/h3\u003e\n\u003cp\u003eUnder-stairs cupboards and service voids beside lit tiled staircases, where it stays accessible for maintenance. Ceiling voids and plant rooms in hotels, restaurants and offices with feature stairs. Joinery and plinths beside short runs of lit steps between floor levels. Anywhere the electrician can mount it in a dry, ventilated and accessible position close to the stair.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRatings\u003c\/th\u003e\n\u003ctd\u003e8W, 30W, 50W, 100W, 180W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003ctd\u003eSix, via the distribution block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eWall switch or motion sensor (on-off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible tape\u003c\/th\u003e\n\u003ctd\u003eOur 12V natural white LED tape, 4.8W or 9.6W per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum run\u003c\/th\u003e\n\u003ctd\u003e10m of 12V tape per run to avoid voltage drop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMains input and IP rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eChoosing the right option\u003c\/h3\u003e\n\u003cp\u003eSize the driver from the tape you are installing. Multiply the total metres of tape by its rating in watts per metre, then choose the next size up so the driver is never working at its limit. For example, 5m of 9.6W tape uses 48W, so the 50W driver is the right choice; 6m of 4.8W tape uses 28.8W, which suits the 30W driver; a single 1m step of 4.8W tape needs only the 8W driver. For large staircases, either choose the 100W or 180W driver and split the tape into several runs, one per port, or use one driver per flight. Whatever the wattage, keep each 12V run to 10m or less, because longer runs lose voltage and the far end will look dimmer than the start.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation, use and care\u003c\/h3\u003e\n\u003cp\u003eThe driver connects to the mains, so it must be installed by a qualified electrician in line with current wiring regulations. Plan its position before tiling starts: it needs to be dry, ventilated and permanently accessible, never sealed behind tiles or plasterboard. Bring each tape lead back to the distribution block and plug it in, then connect the switch or motion sensor on the mains side. Keep the driver clear of insulation and dust, and check it is still accessible after any later building work.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What size driver do I need?\u003c\/strong\u003e\u003cbr\u003eA: Multiply the metres of tape by its watts per metre and choose the next size up. 5m of 9.6W tape is 48W, so choose the 50W driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I dim the lights with this driver?\u003c\/strong\u003e\u003cbr\u003eA: No, this standard driver is for on-off control from a wall switch or motion sensor. For dimming, choose the \u003ca href=\"\/products\/remote-ready-12v-led-driver-for-dimmable-tunable-rgb-stair-lighting\"\u003eremote-ready 12V LED driver\u003c\/a\u003e and a matching \u003ca href=\"\/products\/single-zone-remote-dimmer-controller-for-led-stair-lighting\"\u003esingle-zone remote\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will it run tunable white or RGB tape?\u003c\/strong\u003e\u003cbr\u003eA: No. \u003ca href=\"\/products\/tunable-white-rgb-led-tape-12v-for-led-stair-nosings\"\u003eTunable white and RGB tape\u003c\/a\u003e need the remote-ready driver and the matching remote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How many steps can one driver light?\u003c\/strong\u003e\u003cbr\u003eA: Six reels plug into the distribution block, one per step. For more steps, add an \u003ca href=\"\/products\/extra-port-connector-block-for-led-stair-lighting\"\u003eextra-port connector block\u003c\/a\u003e or a second driver, and keep within the driver's wattage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I fit it myself?\u003c\/strong\u003e\u003cbr\u003eA: The tape plugs into the driver, but the mains connection must be made by a qualified electrician.\u003c\/p\u003e\n\n\u003ch3\u003eOrdering and delivery\u003c\/h3\u003e\n\u003cp\u003eChoose the wattage and quantity, and order it with the LED tape and end caps so the full lighting kit arrives together by courier to UK mainland addresses. Send us your step widths and tape choice and we will confirm the driver size before you order.\u003c\/p\u003e\n","brand":"Stair Nosings UK","offers":[{"title":"8W","offer_id":67820137480350,"sku":"SNU-LEDDRV12-0008W","price":46.9,"currency_code":"GBP","in_stock":true},{"title":"30W","offer_id":67820137513118,"sku":"SNU-LEDDRV12-0030W","price":80.9,"currency_code":"GBP","in_stock":true},{"title":"50W","offer_id":67820137545886,"sku":"SNU-LEDDRV12-0050W","price":123.9,"currency_code":"GBP","in_stock":true},{"title":"100W","offer_id":67820137578654,"sku":"SNU-LEDDRV12-0100W","price":309.9,"currency_code":"GBP","in_stock":true},{"title":"180W","offer_id":67820137611422,"sku":"SNU-LEDDRV12-0180W","price":386.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0601\/5274\/2046\/files\/12v-led-driver-under-stairs-service-void.jpg?v=1793017473","url":"https:\/\/stairnosingsuk.co.uk\/products\/12v-led-driver-for-led-stair-nosing-tape","provider":"Stair Nosings UK","version":"1.0","type":"link"}