{"product_id":"dual-purpose-carpet-gripper-rods-wood-amp-concrete-60ft-or-500ft-box","title":"Dual-Purpose Carpet Gripper Rods - Wood \u0026 Concrete, 60ft or 500ft Box","description":"\u003cp\u003eA carpet that ripples, bunches or creeps away from the skirting within a few months almost always traces back to one thing: it was never properly gripped at the edges. \u003cstrong\u003eThese dual-purpose carpet gripper rods hold a fitted carpet under tension around the whole perimeter of a room\u003c\/strong\u003e, so the power-stretched finish you or your fitter achieves on day one is still there years later.\u003c\/p\u003e\n\n\u003ch3\u003eWhy the pin angle and dual-purpose nailing matter\u003c\/h3\u003e\n\u003cp\u003eEach rod is cut from resin-bonded plywood, five plies thick, then machined along one edge to the bevelled angle that lets the carpet's cut edge tuck away neatly into the gully behind the gripper rather than sitting proud of it. Two staggered rows of passivated pins are pressed through from the underside at a 60 degree angle rather than straight up, which is what stops the carpet backing pulling free again once the fitter's knee-kicker or power stretcher has put tension into it - a pin driven straight up simply lets the carpet lift back off over time, while an angled pin bites and holds against exactly the direction the carpet wants to move. The gripper is dual-purpose because it carries two nail types along its length: standard nails for a timber subfloor and hardened masonry nails for concrete, so the same product goes down whether the room is boarded or screeded.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 degree angled pins\u003c\/strong\u003e - resist pull-out even under a power stretcher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-purpose nailing\u003c\/strong\u003e - one product for both timber and concrete subfloors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBevelled edge\u003c\/strong\u003e - lets the cut carpet edge tuck away for a clean finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResin-bonded five-ply construction\u003c\/strong\u003e - rigid enough to stay flat once nailed down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold by the box\u003c\/strong\u003e - 60ft and 500ft options cover a single room or a full contract\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere it gets used\u003c\/h3\u003e\n\u003cp\u003eGripper rod is fitted around the full perimeter of every room getting a stretch-fit carpet, on both domestic jobs and larger commercial re-carpeting contracts, and along stair edges and landings wherever a fitted carpet - rather than a loose runner - is being laid.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eResin-bonded plywood, 5-ply, 6mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin type\u003c\/td\u003e\n\u003ctd\u003eDual-purpose - passivated pins at 60 degrees, plus wood and masonry nails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubfloor suitability\u003c\/td\u003e\n\u003ctd\u003eTimber and concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60ft box\u003c\/td\u003e\n\u003ctd\u003eApproximately 18.3m coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e500ft box\u003c\/td\u003e\n\u003ctd\u003eApproximately 152.4m coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eChoosing the right box size\u003c\/h3\u003e\n\u003cp\u003eWork out your total perimeter first: measure the length and width of the room in metres, then use (length x 2) + (width x 2) as your starting figure, adding a little extra for doorways and awkward corners. A single average bedroom or living room typically uses well under 18.3m, so the 60ft box is the right call for a one-room job or a small top-up. If you are fitting several rooms, a whole floor, or working as a contractor across multiple jobs, the 500ft box brings the cost per metre down substantially and avoids running out mid-job.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation, use and care\u003c\/h3\u003e\n\u003cp\u003eFix gripper rod around the room perimeter roughly two-thirds of the carpet's thickness away from the skirting, pins angled toward the wall, using the pre-set nails appropriate to your subfloor. Cut to length with a hand saw or padsaw at doorways and corners. Once fitted, it is a permanent, low-maintenance fixture - it sits beneath the carpet and does not need attention unless the carpet itself is replaced, at which point sound, undamaged gripper can usually be reused.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I reuse old gripper rod when replacing a carpet?\u003c\/strong\u003e If the pins are still sharp and the timber isn't split or the nails rusted through, existing gripper can often be reused; replace any section that looks worn.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with underlay as well as carpet?\u003c\/strong\u003e Yes - gripper rod is fitted first, then underlay is cut to fit inside it, followed by the carpet, which hooks onto the gripper pins at the edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the dual-purpose version suitable for a concrete floor?\u003c\/strong\u003e Yes, that is exactly what the masonry nails along its length are for, alongside the wood nails for timber subfloors.\u003c\/p\u003e\n\n\u003ch3\u003eOrdering and delivery\u003c\/h3\u003e\n\u003cp\u003eBoth box sizes are stocked lines shipped flat-packed and ready to cut to length on site - no assembly, just measure, cut and nail down.\u003c\/p\u003e","brand":"Stair Nosings UK","offers":[{"title":"60ft Box (18.3m)","offer_id":48195931013278,"sku":"SNUK-CGRIP-60FT","price":46.9,"currency_code":"GBP","in_stock":true},{"title":"500ft Box (152.4m)","offer_id":48195931046046,"sku":"SNUK-CGRIP-500FT","price":100.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0601\/5274\/2046\/files\/carpet-gripper-studio.png?v=1787729380","url":"https:\/\/stairnosingsuk.co.uk\/products\/dual-purpose-carpet-gripper-rods-wood-amp-concrete-60ft-or-500ft-box","provider":"Stair Nosings UK","version":"1.0","type":"link"}