Non-SlipGrip Heavy Duty GRP Flat Sheet Flooring For Gangways And Factory Floors

filler

Price
Sale price £200.39

VAT included Dispatch in 24 Hours

➜ Need help? Call us on 02031510153

Description

Non-SlipGrip Heavy Duty GRP Flat Sheet Flooring For Gangways And Factory Floors
Description:
SlipGrip Heavy Duty Flat Sheet keeps people on their feet on flat surfaces, such as walkways, ramps, gangways, factory floors and other places where slipping is a possibility.

Extremely durable - our flat sheets comprise of a high quality composite of glass woven matting impregnated with isophthalic polyester resin to ensure a long life, even in the busiest of environments.
Slip resistant - our ExtremeCore™ grit is added in the final layer of laminate providing an excellent slip resistant and hard wearing surface.
Corrosion resistant - our flat sheets resist a wide range of chemicals and are perfectly suited for use even in the harshest of environments. Chemical resistance guides are available on request.
Suitable for - almost any surface including concrete, steel and wood.
Ideal for - marina walkways, warehouse floors, disabled access ramps, factory walkways, and entrance areas to retirement homes, schools and council buildings.
Simple to install and once applied they can be walked on straight away.

Sizes:
Lengths: 800mm, 1200mm, or 2400mm
Width: 1200mm
Thickness: 5 -7mm with grit
Grade: Course (for external areas) or Fine (for internal areas)

Colors:
Black

How to Install:
You can install our SlipGrip Heavy Duty Flat Sheets easily and quickly with our SlipGrip GRP Flooring Sheet Fixing Kits. 1 fixing kit covers 1 full 2400mm x 1200mm sheet.

Preparation:
Ensure that the area is clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.

Dry fit all SlipGrip panels to ensure they fit freely and that they sit flat down on the surface. If required, SlipGrip can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.

Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.

Fixing Kit Application:
Apply an approx. 6mm bead (this may need to be increased dependant on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the SlipGrip panels approx. 25mm in from the edges. Then, starting from the bottom left corner come up at an angle (approx. 200mm across) and then down at an angle, to create a ‘peak and a trough’, repeat this until you reach the end. Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm). A firm bond will be achieved in about one hour under normal circumstances and conditions. Secure with mechanical fixings, as below.

Drill holes 50mm in from all edges at no more than 300mm apart from the centres. Depending on the width of the panels it may be necessary to provide fixing points at 600mm centres down the middle of the panels. As substrates vary considerably, additional fixings may be required to fix the panels down. If fixing down two pieces of flat sheet that is constrained by sides (i.e. a ramp with wall on either side) a 5mm expansion gap should be considered between the two or more sheets. This gap can be filled with a standard high modulus mastic.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed