A fire extinguisher left standing on the floor is easily knocked over, hard to spot in an emergency, and awkward to check during routine inspections, and this double fire extinguisher floor stand solves all three problems at once. Moulded from durable red composite plastic, it holds two extinguishers upright, off the floor and clearly visible, without any drilling or wall fixing needed.

The stand is a single-piece moulding with a wide, stable footprint and a raised back panel that keeps both extinguishers braced upright side by side. Because it stands freely on the floor it suits locations where wall space is unavailable, where the wall itself is unsuitable for a heavy fixed bracket, or where flexibility to reposition the fire point matters, such as during a refurbishment or a temporary site set-up. Holding two extinguishers together also makes it straightforward to pair a water or foam extinguisher with a CO2 unit at a single fire point, as commonly recommended for mixed-risk areas.

Why it works

• Holds two extinguishers – pairs different extinguisher types at a single fire point
• No drilling required – a free-standing floor unit rather than a wall-fixed bracket
• Durable composite plastic – built to withstand daily knocks in busy work areas
• Wide stable base – keeps both extinguishers upright and secure
• Keeps extinguishers off the floor – improves visibility and makes routine inspection easier

Where it's used

This stand suits warehouses, distribution yards, workshops, garages, offices and retail units, wherever a fire point needs to be established quickly without wall fixings, or where the fire point may need to move in future. It is equally useful in rented premises, temporary site cabins, and buildings where the wall construction is not suited to a heavy bracket-mounted extinguisher.

Specifications

Choosing this stand: a floor stand is the right choice wherever wall mounting is impractical, whether that is unsuitable wall construction, a rented unit, or a fire point that may need to move as a space is reconfigured. If a fixed, permanent wall bracket is preferred and the wall can take the load, a bracket-mounted holder may suit better; this stand is the flexible, no-fixing alternative.

Installation, use and care

Position the stand on a flat, level floor close to the fire point location, ideally near an exit route and clearly signed. Place each extinguisher into its position on the stand so it sits securely against the raised back panel. Check periodically that the stand remains stable and undamaged, and reposition as needed if the layout of the space changes.

Frequently asked questions

Does this stand need to be fixed to the floor?
No, it is designed to stand freely on a flat floor without any fixing.

What size extinguishers does it hold?
It is designed for extinguishers in the 6-12kg range; check your specific extinguisher dimensions if you are unsure.

Can I use this outdoors?
It is intended for indoor use; for outdoor fire points a weatherproof cabinet is a better choice.

Ordering and delivery

This stand is stocked in the UK for fast dispatch. See the Product specifications section below this listing for full details before you order.