LED Driver 8W Illuminated Stair Nosings Power Supply

This LED driver power supply is designed to provide a stable, low-voltage output for illuminated stair nosings and other compatible LED profiles. It converts mains voltage to a safe, reliable supply, ensuring your LED stair lighting performs consistently and efficiently.

Ideal for commercial and domestic stairways, corridors and feature steps, this LED driver is available in a full range of wattages – 8W, 30W, 50W, 100W and 180W – to match different lengths and quantities of LED-illuminated nosings. Select the appropriate power rating to suit your installation and maintain safe, long-lasting illumination.

Product Features

• Dedicated LED driver for illuminated stair nosings and compatible low-voltage LED strips.
• Available power ratings: 8W, 30W, 50W, 100W and 180W to suit small to large installations.
• Constant, regulated low-voltage DC output for flicker-free, stable LED performance.
• Designed for connection to standard 220–240V AC mains supply.
• Short-circuit and overload protection to help safeguard both driver and LED fittings.
• Compact, enclosed unit for discrete positioning in service voids or adjacent to stair runs.
• Suitable for continuous or frequently switched use in busy stairwells and access routes.

Key Features and Benefits

• Match power to project size: Choose from 8W, 30W, 50W, 100W or 180W drivers to efficiently run just a few steps or an extensive staircase system.
• Enhanced LED longevity: Regulated output helps protect LED nosings from voltage fluctuations, supporting longer service life and consistent brightness.
• Reliable safety performance: Built-in protection features reduce the risk of damage from overloads or short circuits, supporting safer stairway lighting.
• Versatile installation: Compact format allows the driver to be fitted in ceiling voids, risers, under-stair cupboards or service areas close to the stair run.
• Energy efficient operation: Optimised for LED loads, minimising wasted power and running costs compared with traditional lighting transformers.
• Ideal for refurbishments: Easily integrated with new or existing illuminated stair nosings to upgrade safety and visibility on steps.

Specifications

Applications and Ideal Uses

This LED driver range is suitable for powering low-voltage illuminated stair nosings and related LED fittings in a variety of interior environments.

• Commercial staircases in offices, hotels and public buildings requiring clear step definition.
• Residential stairwells and hallways where subtle LED nosing lighting improves safety and aesthetics.
• Cinemas, theatres and auditoriums needing low-level step lighting linked to controlled power supplies.
• Educational and healthcare facilities with high footfall staircases and access ramps.
• Refurbishment projects upgrading existing stair nosings to LED-illuminated versions.

Frequently Asked Questions

How do I choose the correct wattage LED driver for my illuminated stair nosings?

Add up the wattage of all the LED nosings or strips connected to the driver, then choose a driver with a higher total wattage than the combined load. For example, if your nosings total 24W, a 30W driver would be suitable. Avoid overloading the driver and always allow a margin for safety and efficiency.

Can one LED driver power multiple stair runs?

Yes, provided the total wattage of all connected LED nosings does not exceed the driver’s rated output and the cabling is correctly sized. For longer runs or multiple flights, it is often better to use several drivers positioned closer to each stair run to minimise voltage drop and simplify maintenance.

Is this LED driver suitable for use in damp or exterior locations?

This driver is intended for indoor, dry locations only. If your illuminated stair nosings are used in areas exposed to moisture or outdoors, the driver should be installed in a protected, ventilated enclosure located in a dry area, and all wiring should follow appropriate regulations for that environment.