10mm Carborundum Stair Insert Cut to Any Size


Cut to your exact size — enter the length you need in millimetres, allowing a cutting tolerance of +/- 5mm.The price updates as you type.

Price
Sale price £0.38 (Inc. VAT)
➜ Need help? Call us on 01282 270 010

In stock, ready to ship

Description

Stair treads are rarely a round number, and an insert strip cut a few millimetres short leaves a gap that fills with grit and lifts at the end. This is the same 10mm carborundum insert as our 1m, 1.5m and 2m stock lengths, cut here to the exact millimetre you specify between 250mm and 2000mm, tolerance plus or minus 5mm.

What it is

A slim 10mm-wide strip of aluminium oxide grit bonded into a resin matrix, set in a carrier that beds into a routed groove or sits on the tread surface. Carborundum is the hardest of the common anti-slip infills: it does not polish out under footfall the way a soft PVC insert eventually does, which is why it is specified for entrances, plant rooms, external steps and any stair that gets walked on in wet boots.

At 10mm it is the discreet option. Two or three parallel strips across a tread give a broad grip band without the visual weight of a single wide insert, and on a narrow going a 10mm strip set back from the edge does not compete with the nosing itself.

Why cut to size

Cutting carborundum on site is unpleasant and slow: the grit destroys a fine-toothed blade and the dust is abrasive. Cutting in a workshop keeps the ends square, keeps the grit intact right to the end of the strip, and means the strips arrive ready to bed. On a stair where every going differs, that is the difference between a day of measuring and cutting and an afternoon of fixing.

Specifications

Insert width 10 mm
Anti-slip infill Carborundum (aluminium oxide grit in resin)
Cut length range 250 mm to 2000 mm, tolerance +/- 5 mm
Colours 12, including four speckled and stone-effect finishes
Fixing Bedded in adhesive into a routed groove, or screw fixed
Application Internal or external
Manufactured United Kingdom

Measuring and fixing

Measure each tread individually rather than assuming a flight is consistent, and take 3mm to 5mm off a wall-to-wall measurement so the strip drops in without scraping. Set the strips back at least 15mm from the front arris so the nose edge stays intact. The substrate must be clean, dry and free of laitance; bed in a bar of exterior-grade adhesive worked well into the groove, and weight the strip until cured. Custom lengths are made to your figures, so they are non-returnable except for faults.

Choosing a colour

Where the insert is doing a safety job rather than a decorative one, choose a colour that contrasts in tone with the tread: obsidian on pale concrete, chalk or Portland stone on dark stone. The speckled and marble-effect colours are the ones to pick when the strip should read as part of the floor rather than as a warning line.

Ordering and delivery

Cut lengths are made to order; allow additional working days over a stock length and we will confirm a dispatch date. Standard UK mainland delivery is a flat rate. If your treads sit close to 1m, 1.5m or 2m, the stock listing linked above will reach you sooner.

Delivery Information

ServiceTimeframeCost
Standard UK Delivery2–4 business days£9.99

Orders placed before 12pm Mon–Fri are typically dispatched same day. Delivery to all UK addresses. Contact us for international enquiries.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed