Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

90mm tread × 39mm riserBullnoseAluminium


Price
Sale price £198.90
Inc. VAT

1 × Bright Polished, Apple Green, 2.75 Metres (2750mm) at £198.90 (Inc. VAT) each
Goods total £198.90 (Inc. VAT) inc. VAT, before delivery

UK delivery £9.99 per order · 2 working days from dispatch. Order by 2pm (UK time) on a working day for same-day dispatch. Delivery info

In stock, ready to ship

Trustpilot five-star badge

Need help choosing?

Talk to our team about sizes, finishes and fixing.

Description

This is the 2.75 metre stock length of the heavy duty bullnose stair nosing: a double-channel profile extruded in aluminium alloy at a 5mm gauge, with a 90mm tread plate and a 39mm riser leg. The manufacturer specifies it for medium weight carpet and heavy duty vinyl - the two coverings that take the worst of the wear on a public stair. If you are refurbishing a stairwell that sees hundreds of journeys a day and the edges are already scuffed back to the screed, this is the weight of section that job needs.

Why it works

The gauge does the work

At 5mm, the wall thickness of this extrusion is roughly double that of a domestic stair trim. That matters at the nose, where the load of every descending foot lands on a few millimetres of metal: a thin section deflects, works loose at the fixings, then rattles. The bullnose front is rolled rather than squared, which spreads the contact patch and removes the sharp arris a square edge presents on the way down.

Two channels across a 90mm tread

The double channel puts two parallel bands of PVC insert across the tread instead of one. On a 90mm tread that gives grip across most of the depth a foot actually lands on, and a wider block of colour - which is what makes the step read as an edge from the top of a flight.

Contrast is a specification, not a preference

The manufacturer publishes a Light Reflectance Value for each insert colour and advises a minimum 30-point LRV difference between adjacent surfaces, citing the Equality Act 2010 duty in public buildings and workplaces. That turns insert choice into arithmetic: read the LRV of your floor covering, then pick an insert at least 30 points away from it.

Where it is used

Office and retail stairwells, schools, colleges and university buildings, hospitals and health centres, libraries and community halls, and the shared cores of apartment blocks and student accommodation. It also suits refurbishment work where a previously unprotected concrete or timber edge is being brought up to standard at the same time as a recarpet.

Specifications

Specification Detail
Range Heavyweight range, bullnose double channel
Profile Bullnose, double insert channel
Tread width 90mm
Riser height 39mm
Gauge 5mm
Profile material Aluminium alloy (6000-series, per the manufacturer's safety data sheet)
Insert material Polyvinylchloride (PVC)
Insert channels Two
Length on this listing 2.75m (2750mm)
Other stock lengths in the range 2.44m (2440mm) and 3.22m (3220mm), listed separately here
Finishes Mill Finish, Bright Polished, Satin Gold, Dark Bronze, Satin Black, Mirrorflect Gold
Further finishes The manufacturer also lists Satin Silver, Satin Bronze and Mirrorflect Silver for this profile. Not shown here - contact us and we will quote them
Finish availability Mill Finish is the standard stock finish. The manufacturer states that premium finishes are available on request, subject to minimum quantities, with a lead time normally of 7 to 10 working days
Insert colours All nineteen: Apple Green, Aura, Beige, Blue, Brown, Dark Blue, Dark Green, Dark Grey, Hazard, Mid Brown, Mid Grey, Oyster, Polar Grey, Premium Black, Red, Sage Green, Sahara, White, Yellow
Suitable floor coverings Medium weight carpet; heavy duty vinyl and smooth flooring - manufacturer stated
Slip resistance The manufacturer's stairnosing safety pack includes a BS 7976-2 pendulum test (Floor Safe Ltd, report FS10174, 11 September 2015, Four-S slider, water contaminant) on a sample described as "Stair Tread - Linished", returning 70 PTV dry and 58 PTV wet - both in the HSE's low slip potential band of 36 and above. The report is not colour-specific and no separate figure is published for the PVC inserts.
R rating (DIN 51130) Not published for this line
Fire rating Not published for the standard PVC insert
Hazard insert Surcharged by the manufacturer per channel; this profile has two channels, so it carries the surcharge twice. Already included in the prices shown
Manufacturer compliance mark The manufacturer marks this profile "Building Regs Compliant" on its own product drawing. No regulation, Approved Document part or test reference is cited alongside that mark, and we make no compliance claim of our own.
Fixings Fixed through the tread and screwed down; the quantity supplied per length is not published
Location Internal

Insert colours and published LRV

These figures are the manufacturer's own, from its insert colour chart and its Stair Nosing Insert LRV Data Sheet (rev. January 2022). On-screen colour is for reference only - check a physical sample before committing a specification.

Insert colour LRV (manufacturer stated)
Premium Black 4.48
Dark Blue 5.06
Dark Green 7.96
Blue 9.76
Brown 9.79
Dark Grey 10.16
Mid Grey 17.69
Red 17.70
Mid Brown 21.02
Sage Green 30.13
Apple Green 30.40
Beige 32.64
Polar Grey 42.00
Sahara 49.24
Aura 53.00
Yellow 55.35
Oyster 58.10
White 73.69
Hazard No LRV published - the manufacturer footnotes this colour "surcharges apply"

Choosing the right option

Start with the length. Measure the widest step and add an allowance for the saw cut. This 2.75m bar covers most commercial stair widths in one piece; if your steps are wider or narrower, the 2.44m and 3.22m bars are the same profile, listed together on their own page.

Then the insert. Work out the LRV of the finished tread covering and pick an insert at least 30 points clear of it. A dark carpet takes Yellow, White, Oyster, Aura or Sahara; a pale vinyl takes Premium Black, Dark Blue or Dark Grey. Hazard is the banded high-visibility option, kept for plant rooms, loading bays and back-of-house routes.

The finish is a visual decision - the extrusion underneath is the same. Mill Finish is the plain unanodised option, the least expensive, and the one held as standard stock; the anodised finishes are chosen to sit with ironmongery and trims specified elsewhere in the building, and are made to order, so talk to us before committing to one on a deadline.

Installation, use and care

Make good any irregularity in the step with a repair mortar, clean and dry the surface, then dry-fit the nosing and mark through the fixing holes with the profile pushed hard against the riser. On concrete or stone, drill and plug. Apply a cartridge adhesive to the underside, reposition, screw down firmly, then press the insert in to cover the screw heads. The manufacturer asks for weekly cleaning with a mild detergent in water, and warns against polishes, which reduce the anti-slip properties, and against solvents, steam cleaners and power washers.

Frequently asked questions

Is 39mm the tread or the riser?

The riser. The manufacturer gives this profile as tread 90mm by riser 39mm: the 90mm is the plate that sits on the going, the 39mm is the leg covering the vertical face of the step. Some listings for this profile quote 39mm as a tread width, which is wrong - two insert channels plus the rib between them could not fit across 39mm.

Can it be used outside?

The standard PVC insert is an interior specification and no exterior performance data is published for it. The manufacturer makes a separate GRP exterior insert range for external steps, so an outdoor stair should be specified on that basis instead.

Does it carry a slip rating?

No R value or DIN 51130 classification is published for this line. The only slip figure is the pendulum test in the table above, carried out on a linished tread sample rather than a named insert colour. We have not tested it ourselves and make no claim beyond what the manufacturer publishes.

Does the price change with insert colour?

Only for Hazard. Every other insert colour costs the same, so price is set by the metal finish. Hazard is surcharged by the manufacturer per insert channel, and because this is a double-channel profile that surcharge applies twice. It is already built into the Hazard prices shown, so what you see is what you pay.

Can I have it cut to a step width?

These are supplied as full 2.75m stock lengths for cutting on site. Aluminium of this gauge cuts cleanly with a fine-tooth blade in a mitre saw; file the cut end before fitting.

Ordering and delivery

Choose the finish first, then the insert colour: the price for that exact combination is shown before you add it to the basket. Order one bar per step - count the steps rather than measuring the run. The same profile is also stocked in 2.44m and 3.22m.

View our complete range of stair nosing profiles — aluminium, rubber and PVC options for every application.

Delivery Information

ServiceTimeframeCost
Standard UK Delivery2 working days from dispatch£9.99

Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Overall rating: 5.0 / 5 from 6 reviews.

Customer photo review of Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Faced with revamping the shopping mall entrance, I secured this nosing to reinforce vinyl-covered treads. Installation was a breeze—even during peak business hours—with clear instructions and a straightforward fit over varied covers. Its withstood the heavy foot traffic brilliantly, ensuring customer safety and keeping maintenance low.

Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Customer photo review of Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Came faster than my parcel last Christmas, so no complaints there. Setting it up on the metal stairs leading to our office rooftop was surprisingly hassle-free, once I figured out the right tools. The tread provides decent grip even when its drizzling and theres a mad dash for lunchtime gatherings—steady underfoot just as promised!

Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Customer photo review of Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Took a punt on this for the stairs in our office corridor, and pleasantly surprised how quickly it arrived—practically rapid. The robust packaging ensured that everything stayed tidy and without any scratches during transit. Once its on the go, the tread fits perfectly where needed—cant complain.

Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Customer photo review of Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Got this for our stadium steps where the crowd flows tend to create a bit of wear and tear. The finish truly complements the concrete, giving it a sleek and polished look that elevates the overall appearance. The stair nosing integrated seamlessly even on tricky steps, making everything feel safer in the hustle and bustle of match days.

Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Customer photo review of Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Installed it at the start of the year in our warehouse staircase. The nosing handles a daily pounding with no signs of wear, even under heavy foot traffic and cart loads, maintaining its robustness while providing solid grip. The aluminium doesnt warp or flex - excellent durability all around.

Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Customer photo review of Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

Surprisingly straightforward. Took it to a library job last week; the aluminium stair nosing was easier to cut than expected, which saved me quite a bit of time on site. It fit snugly against the carpeted stairs, no issues with movement or slipping so far. Definitely did its job without fuss, even in a busy spot!

Aluminium Stair Nosing 2.75m | 90mm Bullnose Twin Insert

You may also like

Recently viewed