Tiling a staircase leaves one hard problem: the front edge of every tread. A cut tile arris chips, and a strip screwed on afterwards looks like an afterthought. This heavy duty tile-in nosing solves it as the tiles go down. The 56mm x 55mm aluminium profile beds into the tile adhesive, its perforated tiling leg sits under the tread tile, and the tile finishes flush against it. You get a protected, slip-resistant, colour-contrasted edge, backed by tested slip figures and published light reflectance values. It suits 10mm or 12.5mm ceramic and porcelain tiles, with a 50mm insert in eleven colours.
Why it works
Tested grip
The insert is a REACH-compliant flexible PVC rated R11 on the DIN 51130 ramp test, with pendulum values of 66 dry and 54 wet to BS 7976-2. The UK Slip Resistance Group rates 36 or more as low slip potential, so it stays well inside that band when wet.
The aluminium takes the knocks, not the tile
A 6063-T6 aluminium extrusion takes the heel strikes, trolley wheels and dropped tools that would chip an exposed tile edge. A central T-web and three feet brace the tread, and the 55mm apron covers the riser tile.
Locked into the tiling
Adhesive squeezes up through the anchoring holes in the 18mm tiling leg and grips the profile from both sides, and a keyed rear wall gives the tread tile a square edge to butt against.
Contrast you can measure
At 56mm on the tread and 55mm on the riser, the profile matches the 55mm minimum Approved Document K (clause 1.7a) sets for contrasting nosings outside dwellings. Approved Document M treats contrast as adequate above a 30-point difference in light reflectance value (LRV), and every insert's LRV is listed below. It meets DDA guidance and Building Regulations.
56mm tread x 55mm riser, 6063-T6 aluminium
For 10mm or 12.5mm tiles; perforated 18mm tiling leg
50mm PVC insert, R11, PTV 66 dry / 54 wet
Eleven insert colours with published LRVs
Pre-drilled, with pips to cap the screw heads
Where it is used
Office and reception stairs, schools, hotels, retail flights, hospitals and care homes, and domestic hallways in porcelain or ceramic. It also suits changing room and poolside steps, where the wet slip value matters, and can be used with wood, laminate and stone treads.
Specifications
Specification
Detail
Section
56mm tread x 55mm riser, 18mm perforated tiling leg
Tile depth
10mm or 12.5mm
Body
Extruded aluminium 6063 T6, mill finish matt silver, LRV 73.8
Insert
50mm flexible PVC, replaceable
Slip resistance
R11 (DIN 51130); PTV 66 dry / 54 wet (BS 7976-2)
Insert LRV
White 79.9, Black 4.5, Brown 9.1, Beige 41.1, Canvas 53.2, Red 10.6, Dolphin Grey 27.6, Ice Grey 42.1, Midnight Grey 12.8, Yellow 55.7, Cobalt Blue 9.2
Lengths
1.0m, 1.5m, 2.0m and 3.22m
Supplied with
Pre-drilled, with pips to cap the screw heads (screws and plugs not supplied)
Compliance
Meets DDA guidance and Building Regulations
Choosing the right option
Tile depth first. Measure the tile you are laying. A 12.5mm tile in the 10mm version sits proud of the nose; between sizes, take the deeper version and build up the adhesive bed.
Then colour, by LRV. Pick an insert at least 30 points away from your tile's LRV. On pale porcelain (around LRV 70), Black, Brown, Cobalt Blue, Red and Midnight Grey all qualify. On dark tiles, use White, Yellow or Canvas. At home you can match the tile instead.
Then length. One nosing per tread, in the shortest length that covers the stair width. 1.0m suits most homes; 3.22m runs a wide flight in one piece.
Installation, use and care
Fit while tiling; it cannot go on a finished stair. Cut to length with a fine-tooth blade and file the edge. Fix any riser tile first, then bed the profile into the adhesive so it pushes through the anchoring holes, with the apron covering the riser tile. Lay the tread tile over the leg and grout. Clean inserts with neutral detergent, rinse and let dry before use. Never use solvent cleaners on the aluminium.
Frequently asked questions
Can I fit this to a staircase that is already tiled?
No. The tiling leg sits under the tread tile, so the nosing goes down first. For finished stairs, choose a surface-mounted nosing.
How is it fixed?
It is bedded into the tile adhesive. The adhesive keys through the perforated leg and the tread tile locks it in, so no screws are needed on a sound substrate. It is also pre-drilled, with pips to cap the screw heads, if you want to add screws and plugs (not supplied).
What is the difference between the 10mm and 12.5mm versions?
Only the depth of the tile channel. Section, insert, colours and lengths are the same.
Can the insert be replaced later?
Yes. It is a separate PVC strip, so it can be renewed without lifting any tiles.
Is it suitable for outdoor steps?
It is used on covered external steps and keeps a pendulum value of 54 when wet. On exposed steps, use frost-resistant tile and exterior-grade adhesive.
Ordering and delivery
Choose the insert colour, length and tile depth; each combination is priced on its own. Stock is held in the UK and dispatched from our UK warehouse.
Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Subject to the right of Consumers to return goods for refund under The Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply, We do not sell products on a trial basis. Customers are strongly advised to check suitability and specifications of products before ordering. In some instances, Customers may benefit from special price discounts. Accordingly, orders for such goods can not be cancelled and we can only return or repair Goods where they prove to be defective and the Goods are returned for repair or replacement.
In the event that Stair Nosings UK (a trading name of Express Matting Services Ltd), at its discretion unless the Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply, agrees to accept the return for credit of unwanted products, the goods must be returned with our prior written agreement within 14 days of delivery. The goods must be unopened and in perfect re-saleable condition All goods returned in these circumstances (except where the Consumer Protection Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply. Please ensure that the product(s) you have purchased are to your specification prior to breaking the manufacturers seals. This will avoid disappointment and the product(s) being rejected, should you wish to return them.
13. Reduced price offer & Liquidation Products
13.1 Goods sold on "Reduced price offer" or "Liquidation Stock" are downgraded goods that our company is able to offer at a discount on the normal catalogue price. Stocks of goods offered as above are limited and such goods are sold subject to the following special rules. These special rules apply in addition to, and in the event of any conflict override, all of our other terms and conditions, except those terms and conditions specifically covering Consumers.
13.2 Upon receipt of an order, we will check stock availability. Until stock availability is confirmed to the customer, a contract for sale will not be created and no payment will be debited from the customer.
13.3 All goods sold by us as Reduced price offer & Liquidation Products are sold subject to the following special rules that apply in addition to our other terms and conditions.
13.4 Prices are not subject to value, cash or volume discounts
13.5 All stair nosings are custom-made to order and therefore non-returnable or refundable.
13.6 No liability is accepted for late delivery of goods or goods lost in transit
It is the customer’s responsibility to ensure the safe return of the goods.
Cost of returning goods are solely the responsibility of the customer.
All items must be returned in the original packaging. If merchandise is defective or if you have received the wrong item, Stair Nosings UK (a trading name of Express Matting Services Ltd) will either immediately replace the item or issue a credit or refund within a few days once the merchandise has been returned to them.
James G.
Faced the challenge of renovating a corporate building entrance, and the choice had to enhance that modern aesthetic throughout. Opening the box, it was evident this fitted in seamlessly with our glass and granite surroundings. While fixing it, I noticed how well-designed the casing is; you can tell its meant for high durability in busy spots like ours. Reflects its functional role splendidly without distracting from the understated decor were aiming for.
Edward M.
Came well-packaged and as soon as I set eyes on this heavy duty stair nosing, it was clear its built to handle foot traffic with ease. Put it to the test in a busy public space where rainwater can be a regular nuisance, and this edging truly shines with its impressive performance up against wet conditions. So far, Ive noticed no issues underfoot – consistent grip makes for confident steps every time.
Oliver T.
Wasnt sure at first, when I ordered the product because these things can be hit or miss. It arrived well-packaged, and popping it into place was smoother than expected for something so sturdy. The fit was spot on for tiling over our busy station steps, and handling the daily rush of feet has been impressive without any looseness at joints or wear at the front edge.
Charlotte T.
Installed it a few months back on the librarys outdoor steps, and its been holding up well under constant foot traffic. The profile feels solid, and despite our wet British weather, theres no sign of wear or any loose edges. Definitely impressed by how seamlessly it blends with the tiles.
Emily T.
Got this for tiling the staircase in our hotels entrance, and I couldnt be happier with how easy it was to integrate into the job. The stair nosing seamlessly completed each step without distracting from the elegant marble tiles. As someone overseeing several fittings, I genuinely appreciate a product that offers both style and practicality right from the start.
Amelia H.
Robust and durable, this stair nosing was straightforward to fit and stood up well as we added it to the steps outside our workshop. I found it a breeze to cut down to size with a standard tile saw, which saved us heaps of time during installation. Its been exposed to all sorts of weather and machinery movement, holding its own admirably over the months.
Customer Reviews
Overall rating: 5.0 / 5 from 6 reviews.
Faced the challenge of renovating a corporate building entrance, and the choice had to enhance that modern aesthetic throughout. Opening the box, it was evident this fitted in seamlessly with our glass and granite surroundings. While fixing it, I noticed how well-designed the casing is; you can tell its meant for high durability in busy spots like ours. Reflects its functional role splendidly without distracting from the understated decor were aiming for.
Came well-packaged and as soon as I set eyes on this heavy duty stair nosing, it was clear its built to handle foot traffic with ease. Put it to the test in a busy public space where rainwater can be a regular nuisance, and this edging truly shines with its impressive performance up against wet conditions. So far, Ive noticed no issues underfoot – consistent grip makes for confident steps every time.
Wasnt sure at first, when I ordered the product because these things can be hit or miss. It arrived well-packaged, and popping it into place was smoother than expected for something so sturdy. The fit was spot on for tiling over our busy station steps, and handling the daily rush of feet has been impressive without any looseness at joints or wear at the front edge.
Installed it a few months back on the librarys outdoor steps, and its been holding up well under constant foot traffic. The profile feels solid, and despite our wet British weather, theres no sign of wear or any loose edges. Definitely impressed by how seamlessly it blends with the tiles.
Got this for tiling the staircase in our hotels entrance, and I couldnt be happier with how easy it was to integrate into the job. The stair nosing seamlessly completed each step without distracting from the elegant marble tiles. As someone overseeing several fittings, I genuinely appreciate a product that offers both style and practicality right from the start.
Robust and durable, this stair nosing was straightforward to fit and stood up well as we added it to the steps outside our workshop. I found it a breeze to cut down to size with a standard tile saw, which saved us heaps of time during installation. Its been exposed to all sorts of weather and machinery movement, holding its own admirably over the months.
