Bullnose Aluminium Stair Nosing 55 x 37mm

55mm tread × 37mm riserBullnoseAluminiumHigh Grip Insert


Price
Sale price £107.90
Inc. VAT

1 × Mill Finish, Obsidian - High Grip, 2.44 Metres (2440mm) at £107.90 (Inc. VAT) each
Goods total £107.90 (Inc. VAT) inc. VAT, before delivery

UK delivery £9.99 per order · 2 working days from dispatch. Order by 2pm (UK time) on a working day for same-day dispatch. Delivery info

In stock, ready to ship

Trustpilot five-star badge

Need help choosing?

Talk to our team about sizes, finishes and fixing.

Description

This is a 55 x 37mm bullnose aluminium stair nosing for internal stairs, fitted with a textured High Grip anti-slip insert. It is made for stairs that see wet shoes, spillage or constant footfall: school and office stairwells, surgeries, care homes, shops and communal entrances. The 3.5mm gauge suits vinyl, lino and lightweight carpet, and the rounded nose follows a bullnose step edge instead of fighting it.

Choose Obsidian or Solar inserts in any of nine aluminium finishes, in 2.44m, 2.75m or 3.22m stock lengths for cutting on site.

Technical drawing of 55 x 37mm bullnose aluminium stair nosing with textured High Grip insert: cross-section with 55mm tread, 37mm riser, 35mm inside leg, 3.5mm gauge
Cross-section in mm: 55mm tread, 37mm riser, 35mm inside leg, 3.5mm gauge.

Why this nosing works

Tested grip, wet and dry

A smooth PVC insert is fine on a dry, lightly used stair. Once a step gets wet, grip comes from texture. The High Grip insert has a textured PVC face, and the manufacturer's pendulum results are 95 dry and 60 wet. UK Slip Resistance Group guidance treats 36 and above as low slip potential, so the wet figure has a wide margin. The strip sits on the step edge, exactly where feet land when people walk down a stair.

Contrast you can put a number on

Partially sighted people find a stair by the edge that stands out from the floor. Obsidian (LRV 1.80) and Solar (LRV 55.10) sit at opposite ends of the scale. Choose the one that is at least 30 LRV points away from your floorcovering and the edge reads clearly from the top of the flight.

A bullnose profile on a bullnose step

The 37mm front leg curves round and under the nose of the step, so it sits tight on a rounded edge with no gap behind the metal. The 35mm inside leg gives the riser face a clean, protected finish.

Nine finishes

Mill Finish is plain aluminium for service and back-of-house stairs. Bright Polished gives a bright silver line and Satin Silver a softer one. Satin Gold, Satin Bronze, Dark Bronze and Satin Black suit timber-effect, stone-effect and dark floors. Mirrorflect Silver and Mirrorflect Gold are mirror-bright for reception and front-of-house stairs.

  • 55mm tread x 37mm riser bullnose profile, 3.5mm gauge
  • Textured High Grip insert: pendulum 95 dry, 60 wet
  • Obsidian (LRV 1.80) or Solar (LRV 55.10)
  • 9 finishes, 3 stock lengths, cut on site

Where it's used

Internal stairs in schools and colleges, offices, GP surgeries and clinics, care homes, hotels, shops and the communal stairs of flats, wherever vinyl, safety flooring, lino or light contract carpet meets a rounded step edge and people come in with wet feet. For outside steps, use the exterior-insert version of this profile.

Specifications

Profile Bullnose, single insert channel
Tread (top face) 55mm
Riser (front leg) 37mm
Inside leg depth 35mm
Gauge 3.5mm
Carrier material Aluminium alloy, UK manufactured
Insert High Grip textured anti-slip insert: textured PVC face on a PET base, self-adhesive, approx. 2mm thick
Slip resistance (insert) Pendulum 95 dry / 60 wet (manufacturer data, independent laboratory)
Insert colours (LRV) Obsidian 1.80, Solar 55.10
Finishes Mill Finish, Bright Polished, Satin Silver, Satin Gold, Satin Bronze, Dark Bronze, Satin Black, Mirrorflect Silver and Mirrorflect Gold
Stock lengths 2.44m (2440mm), 2.75m (2750mm), 3.22m (3220mm)
Suitable floorcoverings Vinyl, lino and lightweight carpet
Use Internal stairs; insert service range -10°C to 80°C
Building Regulations Building Regs compliant profile
Fixing Screw-fix through the channel, then fit the insert to hide the fixings; or bond with stair nosing adhesive

Choosing the right option

Insert colour. Pick for contrast. Solar on mid-grey, blue, green and dark floors; Obsidian on pale floors such as light grey, beige or white. Both inserts are the same price.

Finish. Mill Finish is the lowest price, then Bright Polished and Satin Gold. Satin Silver, Satin Bronze, Dark Bronze and Satin Black share the middle price. Mirrorflect Silver and Mirrorflect Gold cost the most. Satin finishes hide scuffs best on busy stairs.

Length. Measure every step, then choose the stock length that cuts into those widths with the least waste. Order a spare where widths vary.

Dry, decorative stair? The same profile is available with standard PVC inserts in 15 colours.

Installation, use & care

Cut each length to the step width with a fine-toothed blade for aluminium and de-burr the ends. The step must be clean, dry and sound. Screw-fix through the channel with fixings to suit the substrate, or bed the profile on a stair nosing adhesive. Clean and dry the channel, peel the backing from the self-adhesive insert and press it firmly into place so it covers the fixings. Lay the floorcovering tight to the back of the profile. Sweep and damp-mop the insert regularly, because trodden-in dirt fills the texture and reduces grip. Avoid abrasive pads on polished and coloured finishes.

Frequently asked questions

How slip-resistant is the High Grip insert?

The manufacturer's pendulum test results for this insert are 95 dry and 60 wet, measured at an independent friction-testing laboratory. Under UK Slip Resistance Group guidance, a pendulum value of 36 or more indicates low slip potential, so the insert stays well above that line even when wet. Results apply to a clean insert; keep the textured face free of dirt and polish build-up.

Obsidian or Solar: which insert colour should I choose?

Choose by contrast with the floor, not by matching it. Obsidian has a light reflectance value (LRV) of 1.80 and Solar 55.10. The manufacturer advises at least 30 points of LRV difference between the step edge and the surrounding floor, so Solar suits mid and dark floors and Obsidian suits pale floors. Your floorcovering manufacturer publishes its LRV on the product data sheet.

Can I use this nosing outside?

No. The High Grip insert is rated for internal use, with a service temperature range of -10°C to 80°C. For external steps, use the same 55 x 37mm bullnose profile with an exterior-grade insert, which is listed separately.

Which floorcoverings does the 3.5mm gauge suit?

Vinyl, lino and lightweight carpet. The gauge is the thickness of the profile where your floorcovering butts up to it, so a 3.5mm covering finishes flush behind the nosing. Thicker carpet needs a heavier-gauge profile.

How many steps will one length cover?

Divide the length by your step width and allow a few millimetres for each saw cut. A 2.44m length gives two 1.2m steps, a 2.75m length gives two 1.35m steps and a 3.22m length gives three 1.05m steps or two 1.6m steps. Choose the length that leaves the least offcut across your staircase.

Ordering & delivery

Each variant is one length of nosing in your chosen finish, insert colour and stock length, with the insert supplied. Screws and adhesive are not included. We deliver to UK mainland addresses; carriage and lead time are shown at checkout. Need a quantity price for a whole building? Contact us with your step count and widths.

See our full range of anti-slip stair nosings: aluminium, rubber and PVC profiles for every type of stair.

Delivery Information

ServiceTimeframeCost
Standard UK Delivery2 working days from dispatch£9.99

Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Overall rating: 5.0 / 5 from 7 reviews.

Customer photo review of Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Job done. Straight out of the box, you can see its a superior choice over other options. Used it throughout our small shopping centre, and the stair nosing firmly holds its place despite heavy daily use. Worth every penny for keeping up with foot traffic under those bright lights, day after day.

Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Customer photo review of Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Had to sort out the parking garage steps due to oil and dirt making them a hazard. This edge detail gave me peace of mind, offering solid footing and seamlessly pairing with the industrial concrete. Its been brilliant, standing up well against all the grime and wheel traffic at a price I found reasonable for such heavy-duty use.

Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Customer photo review of Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Arrived faster than expected, which was a nice surprise. After fitting the stair nosing at our cosy little café, I’ve been impressed with how well it handles under the constant flow of customers and all sorts of weather when shoes are drenched from rain. Despite being concerned about potential slips during those busy morning rushes, these steps equipped with Mor Grip have remained reliable and steady.

Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Customer photo review of Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Took a punt on this mor grip insert for our office entryway, and it turned out to be a sleek addition. The stair nosing arrived promptly in well-secured packaging; felt like unwrapping a new mobile! Fit was spot on with our vinyl-covered steps, making the installation straightforward even for this novice DIYer. Perfectly dependable even in wet weather—with quick footfall every morning, I appreciate its unwavering hold.

Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Customer photo review of Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Installed on my flats staircase and three months later, its still looking as fresh as the day I put it in. The obsidian finish pulls the whole look together, blending seamlessly with our carpet and stands up brilliantly to daily traffic without any wear showing yet. Its a reassuringly solid addition that grips even when dampness drifts through from wet shoes.

Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Customer photo review of Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Got this for the outdoor metal staircase at our factory, and it really completes the look nicely. The stair nosing has a sleek finish that blends well with the industrial surroundings and feels robust underfoot. Happy to report its held up well through all sorts of weather without losing its grip or looking worn.

Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Customer photo review of Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

Surprisingly practical piece of kit. Though it put up quite the fight to cut through, once the stair nosing was trimmed to size and installed on my stairs, it integrated well amidst constant foot traffic. Its sturdy enough for my liking and safe to say, Id go for another one if I ever needed it somewhere else.

Bullnose Aluminium Stair Nosing 55 x 37mm, Mor Grip Insert

You may also like

Recently viewed