On a busy stair, the leading edge of each step takes the hardest wear and causes the most falls. Carpet frays there first, and vinyl lifts there first. This heavy-duty chevron stair nosing is built for that edge. It is a 5mm-gauge extruded aluminium profile that wraps the step: a 64mm top face carries one wide 50mm x 4mm slip-resistant PVC insert, and a 65mm face covers the top of the riser. The riser face is angled in a shallow chevron, which is where the name comes from. It suits contractors, facilities managers and flooring fitters who are specifying stair edges for offices, schools, healthcare buildings, retail units and communal stairs in flats. Each length is 2.44m and can be cut on site. There are nine metal finishes and nineteen insert colours.
Dimensions in mm. Tap to enlarge.
Why it works
A 5mm heavyweight section
At 5mm gauge this profile is much thicker than the light trims sold for domestic stairs. A thicker wall takes impacts from trolleys, heels and dropped loads without denting, and it stays straight across a wide step instead of bowing between fixings. That makes it the right choice where a nosing has to last as long as the floor covering around it.
One wide insert in a clear contrasting colour
The single channel holds a 50mm x 4mm PVC insert running the full length of the nosing. It provides the slip-resistant contact strip underfoot. Because the inserts come in colours measured for light reflectance value (LRV), they also give the visual contrast that Approved Document M and BS 8300 ask for on stair nosings. A worn insert can be replaced without lifting the aluminium.
A chevron riser face that protects the carpet edge
The 65mm riser face drops over the step front and angles back near its bottom edge, so it finishes close to the riser covering and the edge of a medium-weight carpet or smooth floor covering tucks in below it. The 65mm face covers a generous band of the riser, protecting the top edge of the riser covering on busy stairs.
Building Regs compliant stair nosing profile
5mm-gauge aluminium alloy, 64mm tread x 65mm riser
One 50mm x 4mm slip-resistant PVC insert
Nine finishes, nineteen insert colours including Hazard
Peel & Stick: factory-applied adhesive tape
Where it's used
Typical settings are office and school staircases in contract carpet tiles, hospital and care-home stairs in smooth safety flooring, shopping centre and leisure stairs, and communal stairwells in residential blocks. The manufacturer states that the profile is for medium-weight carpets and heavy-duty smooth flooring. It is an interior product; for external steps, choose an exterior-rated nosing.
Specifications
Specification
Detail
Profile
Heavy-duty chevron stair nosing, single insert channel
Insert colour. Choose the insert by contrast with the floor, not by looks alone. Guidance under Approved Document M and BS 8300 is a difference of at least 30 LRV points between the nosing insert and the surrounding floor. These are the manufacturer's stated LRVs: Premium Black 4.48, Dark Blue 5.06, Dark Green 7.96, Blue 9.76, Brown 9.79, Dark Grey 10.16, Mid Grey 17.69, Red 17.70, Mid Brown 21.02, Sage Green 30.13, Apple Green 30.40, Beige 32.64, Polar Grey 42.00, Sahara 49.24, Aura 53.00, Yellow 55.35, Oyster 58.10 and White 73.69. Dark carpet suits a light insert; a light floor suits Premium Black or Dark Grey. Hazard (black and yellow) costs extra.
Finish. Mill is untreated and cheapest. Satin and dark finishes suit most interiors. Bright Polished and Mirrorflect are for feature stairs.
Fixing. Every length in this listing is Peel & Stick: adhesive tape is factory-applied to the underside, so it goes straight down on a sound, flat, dry step edge. For plain lengths to bed in adhesive, see the standard version.
Installation, use & care
Measure each step and cut the nosing with a fine-toothed saw suitable for aluminium, then deburr the cut. The step edge must be sound, clean, dry and square. Dry-fit first, then peel off the backing and press the nosing down firmly along its full length. Clean with a damp mop and neutral detergent, and avoid abrasive pads on polished finishes.
Frequently asked questions
Yes. This heavy-duty chevron profile is Building Regs compliant. If your specification or Building Control needs the paperwork, ask us for a copy of the certificate.
Compare the insert's LRV with your floor's LRV and aim for a difference of at least 30 points. For example, a Yellow insert (LRV 55.35) on a charcoal carpet around LRV 10 gives a clear contrast. Your flooring manufacturer can supply the floor's LRV.
On a clean, sound, flat and dry step edge the factory-applied tape is designed to hold on its own. On uneven, dusty or heavily used stairs, or where your specification asks for it, add mechanical fixings too.
Yes. The manufacturer lists medium-weight carpet and heavy-duty smooth flooring as suitable. The floor covering on the tread butts up to the back of the nosing, and the riser covering finishes under the 65mm face.
Yes. The PVC insert sits in a channel in the aluminium, so a worn or damaged strip can be replaced without removing the nosing. Contact us with the colour and length you need.
Ordering & delivery
Each variant is one 2.44m length. Choose the finish and insert colour above. The price shown includes VAT. For multi-flight projects, contact us with your step count and widths and we will work out the quantity.
View our complete range of stair nosing profiles — aluminium, rubber and PVC options for every application.
Delivery Information
Service
Timeframe
Cost
Standard UK Delivery
2 working days from dispatch
£9.99
Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Subject to the right of Consumers to return goods for refund under The Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply, We do not sell products on a trial basis. Customers are strongly advised to check suitability and specifications of products before ordering. In some instances, Customers may benefit from special price discounts. Accordingly, orders for such goods can not be cancelled and we can only return or repair Goods where they prove to be defective and the Goods are returned for repair or replacement.
In the event that Stair Nosings UK (a trading name of Express Matting Services Ltd), at its discretion unless the Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply, agrees to accept the return for credit of unwanted products, the goods must be returned with our prior written agreement within 14 days of delivery. The goods must be unopened and in perfect re-saleable condition All goods returned in these circumstances (except where the Consumer Protection Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply. Please ensure that the product(s) you have purchased are to your specification prior to breaking the manufacturers seals. This will avoid disappointment and the product(s) being rejected, should you wish to return them.
13. Reduced price offer & Liquidation Products
13.1 Goods sold on "Reduced price offer" or "Liquidation Stock" are downgraded goods that our company is able to offer at a discount on the normal catalogue price. Stocks of goods offered as above are limited and such goods are sold subject to the following special rules. These special rules apply in addition to, and in the event of any conflict override, all of our other terms and conditions, except those terms and conditions specifically covering Consumers.
13.2 Upon receipt of an order, we will check stock availability. Until stock availability is confirmed to the customer, a contract for sale will not be created and no payment will be debited from the customer.
13.3 All goods sold by us as Reduced price offer & Liquidation Products are sold subject to the following special rules that apply in addition to our other terms and conditions.
13.4 Prices are not subject to value, cash or volume discounts
13.5 All stair nosings are custom-made to order and therefore non-returnable or refundable.
13.6 No liability is accepted for late delivery of goods or goods lost in transit
It is the customer’s responsibility to ensure the safe return of the goods.
Cost of returning goods are solely the responsibility of the customer.
All items must be returned in the original packaging. If merchandise is defective or if you have received the wrong item, Stair Nosings UK (a trading name of Express Matting Services Ltd) will either immediately replace the item or issue a credit or refund within a few days once the merchandise has been returned to them.
Freya M.
At this price, the aluminium edging provides unparalleled sturdiness. Fitting snugly over the existing floor covering, the heavy duty stair nosing integrates seamlessly on our busy mall steps. Over a bustling few months, its proven resilient without showing signs of wear—a real workhorse where high footfall could otherwise cause problems.
Emily H.
Works a treat! I slapped some of this heavy-duty stair nosing onto the library’s stone stairs, and it made a world of difference at a fraction of the price Id expected. Its right solid with its snug fit and thick build. Its been part of our setup for months now, coping nicely with crowds trooping in every day. Absolute value grab that solves the problem on bustling steps!
Amelia G.
Had to find a durable solution for the metal stairs in our busy parking garage. The delivery was incredibly quick, and I appreciated how securely packaged it was, ensuring no damages during transit. Installed it swiftly with the peel & stick at the crest of each step, and so far it’s handling our high foot traffic effortlessly despite daily wear from oil stains and damp conditions.
Oliver M.
Came in sturdy packaging, which was a relief. Our office lobby needed something that wouldnt slip under wet conditions, and this alu profile fits the bill perfectly. The grip it provides makes walking in busy areas less of a worry, even on rainy days when it gets slippery.
Thomas M.
Installed it on the fire escape a few months back, and its still in great shape despite constant exposure to the elements. The adhesive held well even through bouts of harsh weather. Undoubtedly happy enough with its durability to consider buying more when needed.
Charlotte W.
Wasnt sure at first if this would arrive in good shape, but I was pleasantly surprised! It came well-packaged and on time, not a scratch on the whole thing. Installing the stair nosing was a breeze; smooth delivery added to a smooth installation. Kept it looking neat even under constant forklift traffic—it’s seriously sturdy!
Alice C.
Bought this for our mall stairs where footfall is high. The stair nosing wasnt just practical but gave the steps a sharp, polished finish that complemented the modern design of our shopping centre. Installed it with ease using peel-and-stick and its held up brilliantly under significant daily traffic.
George M.
Robust strip, thats for sure. The fitting was a bit of a faff but cutting it to match those old stone steps was no trouble. Once on, the heavy duty stair nosing smartly lined the edges and has held its own against plenty of traffic without fuss.
Customer Reviews
Overall rating: 5.0 / 5 from 8 reviews.
At this price, the aluminium edging provides unparalleled sturdiness. Fitting snugly over the existing floor covering, the heavy duty stair nosing integrates seamlessly on our busy mall steps. Over a bustling few months, its proven resilient without showing signs of wear—a real workhorse where high footfall could otherwise cause problems.
Works a treat! I slapped some of this heavy-duty stair nosing onto the library’s stone stairs, and it made a world of difference at a fraction of the price Id expected. Its right solid with its snug fit and thick build. Its been part of our setup for months now, coping nicely with crowds trooping in every day. Absolute value grab that solves the problem on bustling steps!
Had to find a durable solution for the metal stairs in our busy parking garage. The delivery was incredibly quick, and I appreciated how securely packaged it was, ensuring no damages during transit. Installed it swiftly with the peel & stick at the crest of each step, and so far it’s handling our high foot traffic effortlessly despite daily wear from oil stains and damp conditions.
Came in sturdy packaging, which was a relief. Our office lobby needed something that wouldnt slip under wet conditions, and this alu profile fits the bill perfectly. The grip it provides makes walking in busy areas less of a worry, even on rainy days when it gets slippery.
Installed it on the fire escape a few months back, and its still in great shape despite constant exposure to the elements. The adhesive held well even through bouts of harsh weather. Undoubtedly happy enough with its durability to consider buying more when needed.
Wasnt sure at first if this would arrive in good shape, but I was pleasantly surprised! It came well-packaged and on time, not a scratch on the whole thing. Installing the stair nosing was a breeze; smooth delivery added to a smooth installation. Kept it looking neat even under constant forklift traffic—it’s seriously sturdy!
Bought this for our mall stairs where footfall is high. The stair nosing wasnt just practical but gave the steps a sharp, polished finish that complemented the modern design of our shopping centre. Installed it with ease using peel-and-stick and its held up brilliantly under significant daily traffic.
Robust strip, thats for sure. The fitting was a bit of a faff but cutting it to match those old stone steps was no trouble. Once on, the heavy duty stair nosing smartly lined the edges and has held its own against plenty of traffic without fuss.