On a busy stair, the leading edge of each step takes the hardest wear and causes the most falls. Carpet frays there first, and vinyl lifts there first. This heavy-duty chevron stair nosing is built for that edge. It is a 5mm-gauge extruded aluminium profile that wraps the step: a 91mm top face carries two 38mm x 4mm slip-resistant PVC inserts side by side, and a 60mm face covers the top of the riser. The riser face is angled in a shallow chevron, which is where the name comes from. It suits contractors, facilities managers and flooring fitters who are specifying stair edges for offices, schools, healthcare buildings, retail units and communal stairs in flats. Each length is 2.44m and can be cut on site. There are nine metal finishes and nineteen insert colours.
Why it works
A 5mm heavyweight section
At 5mm gauge this profile is much thicker than the light trims sold for domestic stairs. A thicker wall takes impacts from trolleys, heels and dropped loads without denting, and it stays straight across a wide step instead of bowing between fixings. That makes it the right choice where a nosing has to last as long as the floor covering around it.
Two inserts for a wide contrasting band
Two channels hold 38mm x 4mm PVC inserts across the 91mm top, giving a deep slip-resistant contact band where the foot lands. Because the inserts come in colours measured for light reflectance value (LRV), they also give the visual contrast that Approved Document M and BS 8300 ask for on stair nosings. A worn insert can be replaced without lifting the aluminium.
A chevron riser face that protects the carpet edge
The 60mm riser face drops over the step front and angles back near its bottom edge, so it finishes close to the riser covering and the edge of a medium-weight carpet or smooth floor covering tucks in below it. The 60mm face covers a generous band of the riser, protecting the top edge of the riser covering on busy stairs.
5mm-gauge aluminium alloy, 91mm tread x 60mm riser
Two 38mm x 4mm slip-resistant PVC inserts
Nine finishes, nineteen insert colours including Hazard
Supplied plain for adhesive fixing
Where it's used
Typical settings are office and school staircases in contract carpet tiles, hospital and care-home stairs in smooth safety flooring, shopping centre and leisure stairs, and communal stairwells in residential blocks. The manufacturer states that the profile is for medium-weight carpets and heavy-duty smooth flooring. It is an interior product; for external steps, choose an exterior-rated nosing.
Supplied plain for bedding in adhesive; Peel & Stick on request
Slip resistance rating
Not published for this line
Choosing the right option
Insert colour. Choose the insert by contrast with the floor, not by looks alone. Guidance under Approved Document M and BS 8300 is a difference of at least 30 LRV points between the nosing insert and the surrounding floor. These are the manufacturer's stated LRVs: Premium Black 4.48, Dark Blue 5.06, Dark Green 7.96, Blue 9.76, Brown 9.79, Dark Grey 10.16, Mid Grey 17.69, Red 17.70, Mid Brown 21.02, Sage Green 30.13, Apple Green 30.40, Beige 32.64, Polar Grey 42.00, Sahara 49.24, Aura 53.00, Yellow 55.35, Oyster 58.10 and White 73.69. Dark carpet suits a light insert; a light floor suits Premium Black or Dark Grey. Hazard (black and yellow) costs extra.
Finish. Mill is untreated and cheapest. Satin and dark finishes suit most interiors. Bright Polished and Mirrorflect are for feature stairs.
Fixing. Lengths are supplied plain for bedding in adhesive. A Peel & Stick version with factory-applied tape is available on request.
Installation, use & care
Measure each step and cut the nosing with a fine-toothed saw suitable for aluminium, then deburr the cut. The step edge must be sound, clean, dry and square. Bed each length in a suitable stair-nosing adhesive, adding mechanical fixings if your specification or the substrate calls for them, and press it down firmly along the full length. Clean with a damp mop and neutral detergent, and avoid abrasive pads on polished finishes.
Frequently asked questions
Compare the insert's LRV with your floor's LRV and aim for a difference of at least 30 points. For example, a Yellow insert (LRV 55.35) on a charcoal carpet around LRV 10 gives a clear contrast. Your flooring manufacturer can supply the floor's LRV.
Yes, on request. The manufacturer can supply the same profile as Peel & Stick, with adhesive tape factory-applied to the underside. Contact us with the finish, insert colour and quantity for a quote.
Yes. The manufacturer lists medium-weight carpet and heavy-duty smooth flooring as suitable. The floor covering on the tread butts up to the back of the nosing, and the riser covering finishes under the 60mm face.
Yes. The PVC inserts sit in channels in the aluminium, so a worn or damaged strip can be replaced without removing the nosing. Contact us with the colour and length you need.
Ordering & delivery
Each variant is one 2.44m length. Choose the finish and insert colour above. The price shown includes VAT. For a different length, use our 2.75m and 3.22m listings of the same profile to reduce joints on wide stairs. For multi-flight projects, contact us with your step count and widths and we will work out the quantity.
Delivery Information
Service
Timeframe
Cost
Standard UK Delivery
2 working days from dispatch
£9.99
Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Subject to the right of Consumers to return goods for refund under The Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply, We do not sell products on a trial basis. Customers are strongly advised to check suitability and specifications of products before ordering. In some instances, Customers may benefit from special price discounts. Accordingly, orders for such goods can not be cancelled and we can only return or repair Goods where they prove to be defective and the Goods are returned for repair or replacement.
In the event that Stair Nosings UK (a trading name of Express Matting Services Ltd), at its discretion unless the Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply, agrees to accept the return for credit of unwanted products, the goods must be returned with our prior written agreement within 14 days of delivery. The goods must be unopened and in perfect re-saleable condition All goods returned in these circumstances (except where the Consumer Protection Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply. Please ensure that the product(s) you have purchased are to your specification prior to breaking the manufacturers seals. This will avoid disappointment and the product(s) being rejected, should you wish to return them.
13. Reduced price offer & Liquidation Products
13.1 Goods sold on "Reduced price offer" or "Liquidation Stock" are downgraded goods that our company is able to offer at a discount on the normal catalogue price. Stocks of goods offered as above are limited and such goods are sold subject to the following special rules. These special rules apply in addition to, and in the event of any conflict override, all of our other terms and conditions, except those terms and conditions specifically covering Consumers.
13.2 Upon receipt of an order, we will check stock availability. Until stock availability is confirmed to the customer, a contract for sale will not be created and no payment will be debited from the customer.
13.3 All goods sold by us as Reduced price offer & Liquidation Products are sold subject to the following special rules that apply in addition to our other terms and conditions.
13.4 Prices are not subject to value, cash or volume discounts
13.5 All stair nosings are custom-made to order and therefore non-returnable or refundable.
13.6 No liability is accepted for late delivery of goods or goods lost in transit
It is the customer’s responsibility to ensure the safe return of the goods.
Cost of returning goods are solely the responsibility of the customer.
All items must be returned in the original packaging. If merchandise is defective or if you have received the wrong item, Stair Nosings UK (a trading name of Express Matting Services Ltd) will either immediately replace the item or issue a credit or refund within a few days once the merchandise has been returned to them.
Georgia C.
Works a treat when you need something that can handle the bustle of a busy subway. The heavy duty aluminium stair nosing not only nailed it for durability, but it was a solid investment compared to other stuff Ive tried, especially with all those commuters pounding on it daily. Fit was easy and Ive noticed no shifting or wear after months in place. Job well done!
Jessica M.
Had to sort out our library as the tiled staircases were getting scarier by the day! This metal trim adds just the right touch of durability—fitting snugly without any faff. Over time, its handled everything we throw at it with grace.
Laura R.
Delivered in a flash, this product is just what we needed for ensuring safety at the mall entrance. Its design made installation straightforward even on a warm afternoon with busy foot traffic everywhere. The sturdy grip of this stair nosing underfoot has proven its worth through both rain and mobs of shoppers - simplicity and security in each step!
Charlotte W.
Wasnt convinced it would arrive on time, but it came quicker than expected and was very well packaged. Thats always my worry with these larger items, but the stair nosing arrived in pristine condition and fit nicely onto our steps at the office entrance.
Hannah W.
Installed it ages ago at our factorys main staircase, and its handled the foot traffic like a champ. The grip stays solid even under daily shifts, and no signs of bending or rattling after months in place. Wouldnt hesitate to use these again if needed for another high-use area!
Alice G.
Got this for a staircase redoing project at my local village hall. The aluminium finish complements the elegant aesthetic of the place beautifully. Love how this heavy duty stair nosing not only looks sleek but also provides a firm edge to those wide steps, creating both style and safety in one go.
Oliver M.
Unbelievably sturdy. Cutting this heavy duty aluminium stair nosing to fit was easier than I thought, despite its solid feel. Fits perfectly on the stairs – feels reliable enough for the traffic here at the library.
Customer Reviews
Overall rating: 5.0 / 5 from 7 reviews.
Works a treat when you need something that can handle the bustle of a busy subway. The heavy duty aluminium stair nosing not only nailed it for durability, but it was a solid investment compared to other stuff Ive tried, especially with all those commuters pounding on it daily. Fit was easy and Ive noticed no shifting or wear after months in place. Job well done!
Had to sort out our library as the tiled staircases were getting scarier by the day! This metal trim adds just the right touch of durability—fitting snugly without any faff. Over time, its handled everything we throw at it with grace.
Delivered in a flash, this product is just what we needed for ensuring safety at the mall entrance. Its design made installation straightforward even on a warm afternoon with busy foot traffic everywhere. The sturdy grip of this stair nosing underfoot has proven its worth through both rain and mobs of shoppers - simplicity and security in each step!
Wasnt convinced it would arrive on time, but it came quicker than expected and was very well packaged. Thats always my worry with these larger items, but the stair nosing arrived in pristine condition and fit nicely onto our steps at the office entrance.
Installed it ages ago at our factorys main staircase, and its handled the foot traffic like a champ. The grip stays solid even under daily shifts, and no signs of bending or rattling after months in place. Wouldnt hesitate to use these again if needed for another high-use area!
Got this for a staircase redoing project at my local village hall. The aluminium finish complements the elegant aesthetic of the place beautifully. Love how this heavy duty stair nosing not only looks sleek but also provides a firm edge to those wide steps, creating both style and safety in one go.
Unbelievably sturdy. Cutting this heavy duty aluminium stair nosing to fit was easier than I thought, despite its solid feel. Fits perfectly on the stairs – feels reliable enough for the traffic here at the library.