Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert

91mm tread × 40mm riserChevronAluminium40mm Riser


Price
Sale price £147.90 (Inc. VAT)
Inc. VAT

In stock, ready to ship

Need help choosing?

Talk to our team about sizes, finishes and fixing.

  • Fast delivery2 working days
  • Secure paymentsShopify checkout
  • Satisfactionguaranteed

Description

On a busy stair, the leading edge of each step takes the hardest wear and causes the most falls. Carpet frays there first, and vinyl lifts there first. This heavy-duty chevron stair nosing is built for that edge. It is a 5mm-gauge extruded aluminium profile that wraps the step: a 91mm top face carries two 38mm x 4mm slip-resistant PVC inserts side by side, and a 40mm face covers the top of the riser. The riser face is angled in a shallow chevron, which is where the name comes from. It suits contractors, facilities managers and flooring fitters who are specifying stair edges for offices, schools, healthcare buildings, retail units and communal stairs in flats. Each length is 2.75m and can be cut on site. There are nine metal finishes and nineteen insert colours.

Why it works

A 5mm heavyweight section

At 5mm gauge this profile is much thicker than the light trims sold for domestic stairs. A thicker wall takes impacts from trolleys, heels and dropped loads without denting, and it stays straight across a wide step instead of bowing between fixings. That makes it the right choice where a nosing has to last as long as the floor covering around it.

Two inserts for a wide contrasting band

Two channels hold 38mm x 4mm PVC inserts across the 91mm top, giving a deep slip-resistant contact band where the foot lands. Because the inserts come in colours measured for light reflectance value (LRV), they also give the visual contrast that Approved Document M and BS 8300 ask for on stair nosings. A worn insert can be replaced without lifting the aluminium.

A chevron riser face that protects the carpet edge

The 40mm riser face drops over the step front and angles back near its bottom edge, so it finishes close to the riser covering and the edge of a medium-weight carpet or smooth floor covering tucks in below it. The short 40mm face suits steps where only the top of the riser needs covering, keeping the nosing low-profile from below.

  • 5mm-gauge aluminium alloy, 91mm tread x 40mm riser
  • Two 38mm x 4mm slip-resistant PVC inserts
  • Nine finishes, nineteen insert colours including Hazard
  • Supplied plain for adhesive fixing

Where it's used

Typical settings are office and school staircases in contract carpet tiles, hospital and care-home stairs in smooth safety flooring, shopping centre and leisure stairs, and communal stairwells in residential blocks. The manufacturer states that the profile is for medium-weight carpets and heavy-duty smooth flooring. It is an interior product; for external steps, choose an exterior-rated nosing.

Specifications

Specification Detail
Profile Heavy-duty chevron stair nosing, double insert channel
Product code SNU-HEAVDUTYCHEV6I2
Tread depth 91mm
Riser depth 40mm overall (36mm inside leg)
Gauge 5mm
Material Aluminium alloy
Insert PVC, 38mm x 4mm, two channels
Length 2.75m (2750mm); 2.44m and 3.22m are listed separately
Suitable floors Medium-weight carpet, heavy-duty smooth flooring
Finishes Mill, Bright Polished, Satin Silver, Satin Gold, Satin Bronze, Dark Bronze, Satin Black, Mirrorflect Silver, Mirrorflect Gold
Fixing Supplied plain for bedding in adhesive; Peel & Stick on request
Slip resistance rating Not published for this line

Choosing the right option

Insert colour. Choose the insert by contrast with the floor, not by looks alone. Guidance under Approved Document M and BS 8300 is a difference of at least 30 LRV points between the nosing insert and the surrounding floor. These are the manufacturer's stated LRVs: Premium Black 4.48, Dark Blue 5.06, Dark Green 7.96, Blue 9.76, Brown 9.79, Dark Grey 10.16, Mid Grey 17.69, Red 17.70, Mid Brown 21.02, Sage Green 30.13, Apple Green 30.40, Beige 32.64, Polar Grey 42.00, Sahara 49.24, Aura 53.00, Yellow 55.35, Oyster 58.10 and White 73.69. Dark carpet suits a light insert; a light floor suits Premium Black or Dark Grey. Hazard (black and yellow) costs extra.

Finish. Mill is untreated and cheapest. Satin and dark finishes suit most interiors. Bright Polished and Mirrorflect are for feature stairs.

Fixing. Lengths are supplied plain for bedding in adhesive. A Peel & Stick version with factory-applied tape is available on request.

Installation, use & care

Measure each step and cut the nosing with a fine-toothed saw suitable for aluminium, then deburr the cut. The step edge must be sound, clean, dry and square. Bed each length in a suitable stair-nosing adhesive, adding mechanical fixings if your specification or the substrate calls for them, and press it down firmly along the full length. Clean with a damp mop and neutral detergent, and avoid abrasive pads on polished finishes.

Frequently asked questions

Compare the insert's LRV with your floor's LRV and aim for a difference of at least 30 points. For example, a Yellow insert (LRV 55.35) on a charcoal carpet around LRV 10 gives a clear contrast. Your flooring manufacturer can supply the floor's LRV.
Yes, on request. The manufacturer can supply the same profile as Peel & Stick, with adhesive tape factory-applied to the underside. Contact us with the finish, insert colour and quantity for a quote.
Yes. The manufacturer lists medium-weight carpet and heavy-duty smooth flooring as suitable. The floor covering on the tread butts up to the back of the nosing, and the riser covering finishes under the 40mm face.
Yes. The PVC inserts sit in channels in the aluminium, so a worn or damaged strip can be replaced without removing the nosing. Contact us with the colour and length you need.

Ordering & delivery

Each variant is one 2.75m length. Choose the finish and insert colour above. The price shown includes VAT. For a different length, use our 2.44m and 3.22m listings of the same profile to reduce joints on wide stairs. For multi-flight projects, contact us with your step count and widths and we will work out the quantity.

Delivery Information

ServiceTimeframeCost
Standard UK Delivery2 working days from dispatch£9.99

Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Overall rating: 5.0 / 5 from 6 reviews.

Customer photo review of Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Had to sort out the wobbly old treads in our warehouse, and this metal trim gave a robust update. Installing it wasnt too much of a fuss, even around all the machinery and pallets lying about. For what you pay, its done an excellent turn keeping things stable and reducing trip-ups whilst business carries on as usual.

Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Customer photo review of Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Arrived swiftly, packed securely for transit. Installed along the busy concrete steps of our local station, it was quickly put to the test with wet conditions. True to style, this heavy duty stair nosing grips well underfoot and fits snugly into place—an excellent solution where safety is paramount.

Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Customer photo review of Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Wasnt sure at first about changing up the old stair covers in our parking garage, but this turned out to be a fantastic choice. Delivery was surprisingly quick, and everything arrived neatly packed. This heavy duty stair nosing fit perfectly and seems like it will handle all the foot traffic without a hitch.

Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Customer photo review of Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Installed it on the stairs at work months ago and its still holding up brilliantly in our high-traffic hospital corridors. The pieces fit perfectly without much hassle, sealing the edge snugly. Whats truly impressive is its resilience — no signs of wear even under constant stress from all those rushing feet.

Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Customer photo review of Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Got this for improving the public library stairs, and it really spruces up the look. The stair nosing blends seamlessly with the broader aesthetic while also wrapping neatly around each step edge. Definitely wouldn’t think twice about installing more if needed elsewhere.

Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Customer photo review of Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

Impressively solid bit of kit. When I got this nosing out of the box, I could tell it was crafted to last. Once measured and cut, even on the first step at the office entrance, it fitted perfectly and looked great against our tiles. Manageable to work with but still robust enough for heavy traffic.

Heavy Duty Chevron Aluminium Stair Nosing 2.75m, Double Insert, 40mm Riser

You may also like

Recently viewed