A compact 46 x 25mm rake back aluminium stair nosing with a textured High Grip insert, for home stairs with sloping risers. Open-plan and older staircases often have risers that lean back under the nose, and this slim profile follows that slope. The 3.5mm gauge suits vinyl, lino and lightweight carpet.
Choose Obsidian or Solar insert in any of nine aluminium finishes, in 2.44m, 2.75m or 3.22m stock lengths for cutting on site.
Why this nosing works
Small profile, sloping riser
The 25mm front leg is angled to follow a raked riser, so the nosing seats along its full depth instead of touching only at the corner. At 46mm on the tread, the edge looks like a neat trim on a home staircase.
Grip that is measured, not claimed
The High Grip insert has a textured PVC face on a PET base. In pendulum testing at an independent laboratory it scored 95 dry and 60 wet. UK Slip Resistance Group guidance treats 36 and above as low slip potential, so the wet figure clears that line by a wide margin. One full-width strip sits on the step edge, exactly where feet land as people come down the stair.
Pick the insert by LRV
Partially sighted people find a stair by the edge that stands out from the floor. Obsidian (LRV 1.80) suits pale floors and Solar (LRV 55.10) suits mid and dark floors. Aim for a difference of more than 30 LRV points.
A domestic-range profile
The manufacturer lists this profile in its domestic range and does not sell it as Building Regulations compliant. It is made for houses, flats and rental properties. For a stair that Building Control will inspect, choose a standard or DDA range profile instead. The 56 x 32mm rake back is the standard-range alternative.
Nine finishes
Choose the metal to suit the building. Mill Finish is the working option. The satins (Silver, Gold, Bronze and Black) and Dark Bronze hide scuffs on busy stairs. Bright Polished, Mirrorflect Silver and Mirrorflect Gold are for entrances and receptions where the stair is on show.
- Rake back aluminium profile, 46mm tread x 25mm riser, 3.5mm gauge
- Textured High Grip insert: pendulum 95 dry, 60 wet
- Obsidian (LRV 1.80) or Solar (LRV 55.10)
- 9 finishes, 3 stock lengths, for vinyl, lino and lightweight carpet
Where it's used
Houses, flats and rental properties with raked risers: carpeted or vinyl hall stairs, loft conversions and cellar stairs, especially where children, older relatives or pets use the stairs.
Specifications
| Profile |
Rake back, single insert channel |
| Range |
Domestic range |
| Tread (top face) |
46mm |
| Riser (front leg) |
25mm |
| Gauge |
3.5mm |
| Carrier material |
Aluminium alloy, UK manufactured |
| Insert |
One High Grip textured anti-slip insert: textured PVC face on a PET base, self-adhesive, approx. 2mm thick |
| Slip resistance (insert) |
Pendulum 95 dry / 60 wet (manufacturer data, independent laboratory) |
| Insert colours (LRV) |
Obsidian 1.80, Solar 55.10 |
| Finishes |
Mill Finish, Bright Polished, Satin Silver, Satin Gold, Satin Bronze, Dark Bronze, Satin Black, Mirrorflect Silver and Mirrorflect Gold |
| Stock lengths |
2.44m (2440mm), 2.75m (2750mm), 3.22m (3220mm) |
| Suitable floorcoverings |
Vinyl, lino and lightweight carpet |
| Use |
Internal stairs; insert service range -10°C to 80°C |
| Fixing |
Screw-fix through the channel, then fit the insert to hide the fixings; or bond with stair nosing adhesive |
Choosing the right option
Insert colour. Hold a sample of your floor next to the colour chart: the insert should stand out, not blend in. Obsidian and Solar cost the same.
Finish. Mill Finish is the lowest price, then Satin Gold, then Bright Polished. Dark Bronze, Satin Black, Satin Silver and Satin Bronze share the middle price. Mirrorflect Silver comes next. Mirrorflect Gold costs the most. Satin finishes hide scuffs best on busy stairs.
Length. Stair widths are rarely identical, so measure each step at the nose and choose the length that divides into them with the smallest offcuts.
Installation, use & care
Cut each length to the step width with a fine-toothed blade for aluminium and de-burr the ends. The step must be clean, dry and sound. Screw-fix through the channel with fixings to suit the substrate, or bed the profile on a stair nosing adhesive. Clean and dry the channel, peel the backing from the self-adhesive insert and press it firmly into place over the fixings. Lay the floorcovering tight to the back of the profile. Clean the insert as part of the normal floor routine with a neutral detergent. Dirt packed into the texture reduces grip, and floor polish should not be applied to the insert. Abrasive pads will mark polished and coloured finishes.
Frequently asked questions
How slip-resistant is the High Grip insert?
It was tested with the pendulum method used across the UK flooring industry, at an independent laboratory: 95 dry, 60 wet. The UK Slip Resistance Group treats 36 or more as low slip potential. Keep the textured face clean to keep those figures.
How do I know if my home stairs have raked risers?
Hold a square against the riser below the nose. If the riser slopes back towards the step behind, it is raked and this profile will sit flush. If it is vertical, choose a square edge profile.
Will it work on outdoor steps?
No. The High Grip insert is rated for internal use, with a service temperature range of -10°C to 80°C. For external steps, choose a profile with an exterior-grade insert, which is listed separately.
Is this nosing suitable for a commercial building?
It is a domestic-range profile and is not sold as Building Regulations compliant. For offices, schools and shops, choose a standard or DDA range profile.
Should the insert match the floor?
No. The insert is there to mark the edge, so it should contrast with the floor. Use Solar (LRV 55.10) on mid and dark floors and Obsidian (LRV 1.80) on pale ones, aiming for a difference of more than 30 LRV points.
Ordering & delivery
One variant equals one length of nosing in your chosen finish, insert colour and stock length, with the insert supplied. Screws and adhesive are not included. We deliver to UK mainland addresses; carriage and lead time are shown at checkout. Need a quantity price for a whole building? Contact us with your step count and widths.
See our full range of anti-slip stair nosings: aluminium, rubber and PVC profiles for every type of stair.