Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

85mm wideRake BackAluminium


Price
Sale price £165.90
Inc. VAT

1 × Mill Finish, Brimstone - Exterior Grip, 2.44 Metres (2440mm) at £165.90 (Inc. VAT) each
Goods total £165.90 (Inc. VAT) inc. VAT, before delivery

UK delivery £9.99 per order · 2 working days from dispatch. Order by 2pm (UK time) on a working day for same-day dispatch. Delivery info

In stock, ready to ship

Trustpilot five-star badge

Need help choosing?

Talk to our team about sizes, finishes and fixing.

Description

An 85mm tread plate with two anti-slip channels instead of one, on a rake-back leg cut to sit flat against a sloping riser. The second channel is the point: it puts grip where the ball of the foot lands on the way down as well as at the very edge, which is why this profile gets specified on wide public flights, school and hospital stairs, and anywhere the traffic is heavy enough that a single 20mm band wears through in a few years. Seven finishes, three exterior-grade insert colours, three stock lengths.

Why this profile works

Two channels, 85mm of coverage

A single-channel nosing protects the arris and little else. On an 85mm plate you can run two insert bands separated by a narrow aluminium rib, which roughly doubles the grip area and gives you a second line of defence when the front band starts to polish. It also reads more clearly as a step edge from above, which matters on a wide flight where people are moving fast.

The rake is not optional

This is a rakeback profile. The back leg is cut at an angle to bed against a riser that leans back under the tread, which is how most older concrete flights and steel-stringer stairs are built. On a plumb riser it will not sit flush — you want a square-back profile instead, and we would rather point you at one than take the order.

The numbers that matter on a wet stair

The Exterior Grip insert fitted here is not a PVC strip. It is a gel-coated GRP panel with fused alumina or quartz grit bedded in at the wet stage of manufacture, so the grit is part of the sheet rather than a coating on top of it. The manufacturer's data sheet gives TRL pendulum values of above 95 dry and above 85 wet, against an interpretation table where 36 and over already counts as low slip potential. It also publishes 193 MPa flexural strength and 123 MPa tensile strength, and rates the material General Purpose (GP) grade for fire resistance.

Contrast you can put in an access statement

The Equality Act 2010 pushes specifiers to demonstrate contrast between adjacent surfaces, measured as Light Reflectance Value, with a minimum 30-point difference advised. The manufacturer publishes LRVs for this insert range: Coal at 5.09 and Brimstone at 54.24 — a 49-point spread, so whichever way your floor falls on the scale one of them clears the guidance comfortably. Ask us for the LRV sheet if you need it for a submission.

Where it is used

Wide public stair flights in schools, colleges, hospitals and civic buildings. Transport and leisure buildings where footfall is heavy and wet. Office and apartment communal stairs finished in sheet vinyl or lino. External entrance steps and covered walkways. Suitable for vinyl, lino and lightweight carpets; it is not intended for heavy contract carpet.

Specification

Profile material Extruded aluminium alloy
Insert material Gel-coated GRP with fused alumina / quartz grit (Exterior Grip range)
Insert channels Double
Stair profile requirement Rakeback (sloping riser)
Tread 85mm
Riser 32mm external, 29mm internal
Gauge 3.5mm
Stock lengths 2.44m (2440mm), 2.75m (2750mm), 3.22m (3220mm)
Finishes Mill Finish, Satin Gold, Satin Bronze, Dark Bronze, Satin Black, Mirrorflect Silver, Mirrorflect Gold
Insert colours Brimstone, Coal, Everest
Suitable floor finishes Vinyl, lino and lightweight carpets
Slip resistance (TRL pendulum) Above 95 dry, above 85 wet — manufacturer stated (36+ = low slip potential)
Insert LRV Coal 5.09, Brimstone 54.24 — manufacturer stated (30-point difference advised)
Fire resistance General Purpose (GP) grade — manufacturer stated
Flexural / tensile strength 193 MPa / 123 MPa — manufacturer stated
Fixings Not supplied — select to suit the substrate

Choosing the right option

Check the riser first. Hold a square against the step. If the riser leans back, this rakeback profile is correct. If it drops plumb, you want a square-back double channel instead — ask us and we will point you at it.

Single or double channel. Take the double where the flight is wide, the traffic is heavy, or the stair is a designated escape route. On a domestic or low-traffic stair a single channel is usually enough and costs less.

Insert colour is a safety decision, not a styling one. Brimstone is amber-yellow at LRV 54.24 and gives the strongest contrast on dark and mid-tone floors. Coal is near-black at LRV 5.09 and reads best against pale treads. Everest is a light neutral grey. Choose the insert that fights your floor, not the one that matches it.

Then the length. Measure the widest flight and take the next stock length up; all three cut down on site.

Installation, use and care

Lay the floor covering first, up to where the back edge of the plate will sit. Cut the profile 2–3mm short of the tread width so it is not forced in. Drill through the plate at roughly 300mm centres and 75mm in from each end, then fix with countersunk screws and plugs suited to the substrate — masonry anchors into concrete, standard screws into timber. Bed the angled leg against the riser as you tighten so it pulls in flat. Clean with a damp mop and neutral detergent, avoid abrasive pads and solvent cleaners on the coloured finishes, and clear grit out of both insert channels regularly — trapped grit is what wears an anti-slip surface smooth.

Fixings are not supplied with this profile. If you need them included, tell us the substrate when you order and we will quote them alongside.

Frequently asked questions

Why choose a double channel over a single?

Two insert bands across an 85mm tread roughly double the grip area and give you a second band still working when the leading one begins to polish. It is the usual specification for wide, heavily used public flights; on a quiet domestic stair a single channel is normally sufficient.

How do I know whether I need a rakeback nosing?

Hold a set square or spirit level against the riser. If it slopes backwards under the tread, you need a rakeback profile like this one. If it is vertical, a square-back nosing is correct and this one will not sit flush.

Can it be used outside?

Yes. Exterior Grip is the insert family made for exposed and wet conditions, and the aluminium carrier does not corrode. The manufacturer's data sheet gives TRL pendulum values above 95 dry and above 85 wet, where anything over 36 is rated low slip potential.

Will it work over carpet?

Over lightweight carpet, yes. It is designed around vinyl, lino and lightweight carpets at a 3.5mm gauge; heavy contract carpet needs a deeper profile, so send us the pile thickness and we will check it.

Ordering and delivery

All 63 combinations — seven finishes by three insert colours by three lengths — are listed and priced individually above. Profiles ship as full stock-length bars for cutting on site. For project quantities or a colour not listed, send us the drawings and we will price it.

View our complete range of stair nosing profiles — aluminium, rubber and PVC options for every application.

Delivery Information

ServiceTimeframeCost
Standard UK Delivery2 working days from dispatch£9.99

Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Overall rating: 5.0 / 5 from 6 reviews.

Customer photo review of Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Had to sort out a slippery situation at the local uni, and this sturdy strip was just the ticket. Fitted it along the wooden stair treads in our campus building, and with all the hustle and bustle around here, its really held its ground. Those clever grips make even rushed students feel safer than ever.

Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Customer photo review of Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Arrived promptly and well-packaged. The extra width of the tread ensures solid traction, especially noticeable in wet conditions where thats vital. Weve installed it on our hospitals terraced steps, and its held up impressively under the constant stream of people throughout the day. The stair nosing fits snugly to offer great stability with each step, giving us peace of mind knowing that even during busy hours, theres ample grip for everyone passing through.

Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Customer photo review of Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Wasnt sure going in if the delivery would preserve its sharp looks, but unboxing revealed a pristine finish with just the right heft. Fitting it on my high-traffic mall entrance, the stair nosing snugly lined up along tiles much to my relief, showing off those anti-slip channels to full effect. Seems like its not just showy from afar—it really does look impressive up close and seems well-suited for the busyness it faces daily outside shops.

Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Customer photo review of Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Took a chance fitting it to our factory staircase. With daily usage by dozens of workers, its performed excellently and has maintained its hold well after several months. The aluminium is robust without adding significant weight - still looking good as new despite constant foot traffic.

Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Customer photo review of Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Got this for the office staircase, and right out of the box it made quite an impact. The stair nosing really gives a professional finish that complements the stone steps. Its refreshing to see something both functional and stylish that holds up well despite the traffic throughout the day.

Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Customer photo review of Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

Brilliantly versatile. The instructions were spot on, making it easy to cut the nosing to the precise lengths needed for our library steps. Once fitted, the stair nosing felt rock solid and handled the daily foot traffic like a champ. Would definitely recommend to anyone needing durability and ease of installation in high-use areas.

Aluminium Stair Nosing 85mm Rake Back | Twin Anti-Slip GRP Inserts

You may also like

Recently viewed