Need help choosing?
Talk to our team about sizes, finishes and fixing.
This is a solid brass bullnose stair nosing for staircases that take real foot traffic: hotel and pub stairs, shop and office stairwells, school and apartment common parts, and period homes where a brass edge suits the interior. The profile has an 89mm ribbed tread face and a smooth rounded bullnose that wraps 43mm down over the front of the step. It is 5.0mm thick, one piece of brass all the way through, with no plating and no insert. It is made to finish the nose of a stair where carpet or carpet tiles butt up behind it, or it can be rebated so it sits flush in a timber tread. Each length is cut to the millimetre you order, from 700mm to 2700mm, and you pay by the metre.
It protects the part of the stair that wears first. Foot traffic concentrates on the front edge of each step. Carpet goes bald there and timber or stone nosings chip and round over. The 5.0mm brass section takes that wear instead. It is solid metal, so as it wears it simply shows more brass. There is no coating to wear through.
The grip is part of the metal. The ribs are cut into the tread face and run along the length of the nosing. There is no separate strip to peel, lift or replace. The manufacturer publishes slip resistance values of 45 wet and 73 dry for the profile.
The bullnose defines the step edge. The rounded nose gives each step a clear, consistent leading edge that people can see and feel. The finish you choose decides how strongly that edge contrasts with the tread (light reflectance values are in the table below).
It is rated for heavy foot traffic. The manufacturer specifies this profile for heavy foot traffic: hotels, pubs, clubs, cafes, shops, schools, commercial offices and apartment buildings. A 5mm solid section with no insert has nothing to work loose, so the step edge stays intact in exactly those places.
| Material | Solid brass, grade H/H CZ108 to BS EN 12164:2016 |
|---|---|
| Profile | Ribbed tread with rounded bullnose |
| Tread face width | 89mm, ribbed |
| Nose depth (overall) | 43mm |
| Drop below the tread underside | 38mm |
| Gauge (section thickness) | 5.0mm |
| Insert | None: solid brass throughout |
| Length | Cut to your size, 700mm to 2700mm per piece |
| Cutting tolerance | ±5mm |
| Weight | Approximately 3.28kg per metre |
| Slip resistance (published) | SRV 45 wet, 73 dry (manufacturer's published slip resistance values) |
| Light reflectance value (LRV) | Polished brass 71.45 · Satin brass 59.55 · Antique brass 29.55 · Antique bronze 9.15 |
| Drilling | Drilled for countersunk screws, or undrilled |
| Screw size | No. 8 countersunk |
| Application | Interior stairs; butts up to carpet and carpet tiles, or rebated flush into timber treads |
| Suitability | Heavy foot traffic: hotels, pubs, clubs, cafes, shops, schools, commercial offices and apartment buildings |
| Matching details | Carpet nap trim, ramped back-edge trim for retrofit over an existing floor, and tread extenders, available to order: ask us |
| Recyclability | 100% recyclable at suitable disposal centres |
Finish. Polished brass is bright and reflective (LRV 71.45) and is the lowest price per metre. Satin brass is the same metal with a brushed, low-glare surface (LRV 59.55). Antique brass is a darkened, warm brown (LRV 29.55). Antique bronze is the darkest, close to black (LRV 9.15). On a pale timber or light carpet it gives the strongest visual contrast at the step edge. Both antique finishes are applied chemically and finished by hand, so they vary slightly from batch to batch. If you need every step to match, order the whole staircase at once.
Drilling. Choose Drilled to receive the nosing pre-drilled for No. 8 countersunk screws, ready to fix on site. Drilling adds 10% to the cut price. Choose Undrilled if you would rather set out and drill the holes yourself, for example to avoid existing fixings or services in the tread.
Length. Measure each step edge and enter the length in millimetres. The price is calculated from the length you enter, so a 1000mm piece costs one metre's rate and a 2700mm piece costs 2.7 times that. For stairs wider than 2700mm, order two pieces and butt-join them.
Fix onto a sound, flat tread, with the bullnose tight against the front edge of the step. Fix it mechanically with No. 8 countersunk screws: on concrete or stone, plug and screw rather than relying on adhesive alone. To bring the tread face flush with the floor finish, rebate the timber by the thickness of the section before fixing. Screws and plugs are not listed as included, so allow for them. Clean with a damp cloth and mild detergent. Polished and satin brass will darken naturally; a non-abrasive brass polish restores them. Do not polish the antique finishes, because polish strips the applied patina and it cannot be restored on site.
Can I use it on outside steps?
The manufacturer specifies it for interior stairs and publishes no external performance data for this profile, so we don't recommend it for exposed external steps.
Will it fit my stair edge?
The tread section sits on top of the step and the bullnose curls down over the front edge: 38mm below the underside of the tread section, 43mm overall. Compare your stair edge with the technical drawing on this page. If you're unsure, send us a photo of the step edge before ordering.
Can carpet run over the nosing instead of butting up to it?
This profile is made for carpet to butt up to its back edge. For a carpet-over or nap finish, or to retrofit over an existing floor without lifting it, there are matching nap and ramped back-edge trims: ask us and we will quote them with the nosing.
Does the 89mm include the rounded nose?
Yes. 89mm is the full width of the tread face from the back edge to the front of the bullnose.
How do I get the price for my staircase?
Enter each length and the number of pieces, and the calculator shows the total before you add it to the basket. The metre rate depends on the finish you choose.
Every piece is cut to order to the length you enter, so please double-check your measurements, allowing for the ±5mm tolerance. Estimated delivery is 2 to 7 working days. If you are matching an existing interior, order one short length first to check the finish before committing to the full staircase.
View our complete range of stair nosing profiles — aluminium, rubber and PVC options for every application.
| Service | Timeframe | Cost |
|---|---|---|
| Standard UK Delivery | 2 working days from dispatch | £9.99 |
Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Overall rating: 5.0 / 5 from 8 reviews.
At this price, the brass edge was a worthy addition to our office stairs. It paired beautifully with the marble and provided a seamless transition that blends perfectly. Absolutely would consider purchasing it again for another project since it sits against our flooring so snugly and looks timeless.
Solid Brass Bullnose Stair Nosing 89mm Ribbed Tread, Cut to Size 700-2700mm
Job done! I needed something sturdy but wallet-friendly for the busy school corridor and was chuffed to find this bullnose cover striking just the right balance. For a bustling area like ours, finding a decent stair nosing that doesnt cost an arm and a leg feels like uncovering gold dust. Installation was straightforward enough, and its held up beautifully under all those feet shuffling past daily.
Solid Brass Bullnose Stair Nosing 89mm Ribbed Tread, Cut to Size 700-2700mm
Flights up our old pub stairs were getting worn, so chose the brass tread for a robust touch. Installation was swift, I appreciated the speedy delivery and meticulous packaging. Blends perfectly with the vintage decor and withstands bustling footfall seamlessly.
Solid Brass Bullnose Stair Nosing 89mm Ribbed Tread, Cut to Size 700-2700mm
Came swiftly and was packaged securely. Fitting the piece onto our hotel’s lobby steps was incredibly straightforward, complementing the carpet beautifully. Despite our frequently rainy weather and constant footfall during events, this one handles brilliantly with no slips or wear. Its elegant bullnose design just complements that classic style we adore!
Solid Brass Bullnose Stair Nosing 89mm Ribbed Tread, Cut to Size 700-2700mm
Wasnt sure at first, but when the nosing arrived on time in sturdy packaging, I was impressed. We put it down in our busy shopping centre to withstand all the daily footfalls. The stair nosing has been a solid purchase so far—definitely got what we paid for without breaking the budget.
Solid Brass Bullnose Stair Nosing 89mm Ribbed Tread, Cut to Size 700-2700mm
Put it in ages ago, and mate, its still looking ace; shows no wear even with everyone trudging over it from shop runs and groceries. Arrived surprisingly quick in a nifty package—no faff, just got on with fitting it up the stone steps at the apartment. Keeps looking spiffing tidy through every weather tantrum!
Solid Brass Bullnose Stair Nosing 89mm Ribbed Tread, Cut to Size 700-2700mm
Got this for our office stairwell, and its transformed the look dramatically. The solid brass stair nosing stands out beautifully against the marble steps, adding a touch of classic elegance to our modern space. For such quality and style, it’s fair to say we received great value for money.
Solid Brass Bullnose Stair Nosing 89mm Ribbed Tread, Cut to Size 700-2700mm
Surprisingly sturdy! The stair nosing fit like a glove in our bustling school corridor. Cutting it to size was much easier than anticipated, and once in place, its been handling the constant foot traffic beautifully, remaining totally secure without hassle stitching it back. Just what we needed for those heavy trodden areas where skids can be common!
Solid Brass Bullnose Stair Nosing 89mm Ribbed Tread, Cut to Size 700-2700mm
