A compact 46 x 25mm square edge aluminium stair nosing with a textured High Grip insert, sized for home stairs. It is a neat, low-profile edge for hall stairs, loft and cellar steps and utility or garage stairs where wet shoes and pets make a smooth insert slippery. The 3.5mm gauge suits vinyl, lino and lightweight carpet.
Choose Obsidian or Solar insert in any of nine aluminium finishes, in 2.44m, 2.75m or 3.22m stock lengths for cutting on site.
Why this nosing works
Slim enough for a domestic stair
At 46mm on the tread and 25mm down the riser, this profile is smaller than a commercial nosing, so it reads as a trim line rather than an industrial strip. The square nose sits flush on square-cut timber and MDF steps.
Tested grip, wet and dry
A smooth PVC insert is fine on a dry, quiet stair. Once a step gets wet, grip comes from texture. This insert has a textured PVC face, and its pendulum results are 95 dry and 60 wet, measured by an independent laboratory. Under UK Slip Resistance Group guidance, 36 or more means low slip potential. One full-width strip sits on the step edge, exactly where feet land as people come down the stair.
An edge people can see
The insert colour does the safety work. Solar, a golden yellow at LRV 55.10, stands out on grey, blue and dark floors. Obsidian, a near-black at LRV 1.80, stands out on beige, white and light grey. Your floorcovering's LRV is on its data sheet.
A domestic-range profile
The manufacturer lists this profile in its domestic range and does not sell it as Building Regulations compliant. It is made for houses, flats and rental properties. For a stair that Building Control will inspect, choose a standard or DDA range profile instead. The 56 x 32mm square edge version is the standard-range alternative.
Nine finishes
Choose the metal to suit the building. Mill Finish is the working option. The satins (Silver, Gold, Bronze and Black) and Dark Bronze hide scuffs on busy stairs. Bright Polished, Mirrorflect Silver and Mirrorflect Gold are for entrances and receptions where the stair is on show.
- Square edge aluminium profile, 46mm tread x 25mm riser, 3.5mm gauge
- Textured High Grip insert: pendulum 95 dry, 60 wet
- Obsidian (LRV 1.80) or Solar (LRV 55.10)
- 9 finishes, 3 stock lengths, for vinyl, lino and lightweight carpet
Where it's used
Houses, flats, rental properties and holiday lets: hall stairs, loft and cellar steps, back-door steps inside the house and garage or utility stairs where wet shoes, spillage and pets make a smooth edge slippery.
Specifications
| Profile |
Square edge, single insert channel |
| Range |
Domestic range |
| Tread (top face) |
46mm |
| Riser (front leg) |
25mm |
| Gauge |
3.5mm |
| Carrier material |
Aluminium alloy, UK manufactured |
| Insert |
One High Grip textured anti-slip insert: textured PVC face on a PET base, self-adhesive, approx. 2mm thick |
| Slip resistance (insert) |
Pendulum 95 dry / 60 wet (manufacturer data, independent laboratory) |
| Insert colours (LRV) |
Obsidian 1.80, Solar 55.10 |
| Finishes |
Mill Finish, Bright Polished, Satin Silver, Satin Gold, Satin Bronze, Dark Bronze, Satin Black, Mirrorflect Silver and Mirrorflect Gold |
| Stock lengths |
2.44m (2440mm), 2.75m (2750mm), 3.22m (3220mm) |
| Suitable floorcoverings |
Vinyl, lino and lightweight carpet |
| Use |
Internal stairs; insert service range -10°C to 80°C |
| Fixing |
Screw-fix through the channel, then fit the insert to hide the fixings; or bond with stair nosing adhesive |
Choosing the right option
Insert colour. Hold a sample of your floor next to the colour chart: the insert should stand out, not blend in. Obsidian and Solar cost the same.
Finish. Mill Finish is the lowest price, then Satin Gold, then Bright Polished. Dark Bronze, Satin Black, Satin Silver and Satin Bronze share the middle price. Mirrorflect Silver comes next. Mirrorflect Gold costs the most. Satin finishes hide scuffs best on busy stairs.
Length. Stair widths are rarely identical, so measure each step at the nose and choose the length that divides into them with the smallest offcuts.
Installation, use & care
Cut each length to the step width with a fine-toothed blade for aluminium and de-burr the ends. The step must be clean, dry and sound. Screw-fix through the channel with fixings to suit the substrate, or bed the profile on a stair nosing adhesive. Clean and dry the channel, peel the backing from the self-adhesive insert and press it firmly into place over the fixings. Lay the floorcovering tight to the back of the profile. Clean the insert as part of the normal floor routine with a neutral detergent. Dirt packed into the texture reduces grip, and floor polish should not be applied to the insert. Abrasive pads will mark polished and coloured finishes.
Frequently asked questions
What are the slip test results for this insert?
It was tested with the pendulum method used across the UK flooring industry, at an independent laboratory: 95 dry, 60 wet. The UK Slip Resistance Group treats 36 or more as low slip potential. Keep the textured face clean to keep those figures.
Is this nosing suitable for a commercial building?
It is a domestic-range profile and is not sold as Building Regulations compliant, so for offices, schools, shops and other non-domestic stairs choose a standard or DDA range profile. It is ideal for houses, flats and rental properties.
Will it work on outdoor steps?
No. The High Grip insert is rated for internal use, with a service temperature range of -10°C to 80°C. For external steps, choose a profile with an exterior-grade insert, which is listed separately.
Will it look bulky on a home staircase?
No. At 46mm on the tread and 25mm on the riser it is a slim, low-profile edge, and a finish such as Satin Silver or Satin Black blends with most home decor while the insert does the work.
Should the insert match the floor?
No. The insert is there to mark the edge, so it should contrast with the floor. Use Solar (LRV 55.10) on mid and dark floors and Obsidian (LRV 1.80) on pale ones, aiming for a difference of more than 30 LRV points.
Ordering & delivery
One variant equals one length of nosing in your chosen finish, insert colour and stock length, with the insert supplied. Screws and adhesive are not included. We deliver to UK mainland addresses; carriage and lead time are shown at checkout. Need a quantity price for a whole building? Contact us with your step count and widths.
See our full range of anti-slip stair nosings: aluminium, rubber and PVC profiles for every type of stair.