Square Aluminium Stair Nosing 2.75m, 46mm Tread x 25mm Riser

46mm tread × 25mm riserSquare EdgeAluminiumSingle PVC Insert


Price
Sale price £102.90
Inc. VAT

1 × Bright Polished, Apple Green, 2.75 Metres (2750mm) at £102.90 (Inc. VAT) each
Goods total £102.90 (Inc. VAT) inc. VAT, before delivery

UK delivery £9.99 per order · 2 working days from dispatch. Order by 2pm (UK time) on a working day for same-day dispatch. Delivery info

In stock, ready to ship

Trustpilot five-star badge

Need help choosing?

Talk to our team about sizes, finishes and fixing.

Description

This is the slim, square-edged nosing for home staircases: a 46mm tread leg and a short 25mm riser leg that tucks neatly over the step edge without dominating it. It is the right choice when you are laying vinyl, lino or a lightweight carpet on domestic stairs and want a hard-wearing, crisp edge with a coloured anti-slip strip, rather than a bulky commercial profile.

Each 2.75m (2750mm) length takes one slip-resistant PVC insert, and you choose both the aluminium finish and the insert colour, so the edge can blend in with the floor or stand out clearly against it.

Why this profile works

A low 25mm riser leg for domestic steps

Most home staircases have shallow bullnosed or square timber nosings. A 25mm riser leg wraps the front of the step just far enough to protect it, without the deep face of a commercial nosing covering the riser. The 46mm tread leg gives enough room for one full-width insert while leaving most of the tread covered by your chosen floor.

A 3.5mm gauge sets the floors it suits

The gauge is the depth your floorcovering has to meet behind the nosing. At 3.5mm it lines up with sheet vinyl, lino and lightweight carpet, so the covering finishes flush with the back of the profile instead of leaving a lip to catch a toe. For medium-weight or heavy carpet, pick a 5mm gauge heavyweight profile instead.

A replaceable slip-resistant insert

The anti-slip work is done by a PVC insert held in a single channel. When it eventually wears on a busy family staircase, you replace the insert, not the aluminium. Exterior-grade inserts also fit this profile, so it can be used on covered outside steps.

  • Square edge aluminium profile, 46mm tread x 25mm riser, 3.5mm gauge
  • Single insert channel with a replaceable slip-resistant PVC insert
  • 2.75m (2750mm) stock length, cut to step width on site
  • 6 aluminium finishes x 15 insert colours

Where it's used

Houses, flats and rental properties, loft and cellar stairs, utility and garage steps, holiday lets, and short runs of covered steps outside a back door. This profile is from the domestic range and is not intended for stairs that must meet Building Regulations, such as common parts of apartment blocks, offices or public buildings. Choose a DDA range profile for those.

Specifications

Profile Square edge, single insert channel
Range Domestic range
Tread (top leg) 46mm
Riser (front leg) 25mm
Gauge 3.5mm
Stock length 2.75m (2750mm)
Profile material Aluminium
Insert material PVC (polyvinyl chloride), slip-resistant
Number of inserts 1
Suitable floorcoverings Vinyl, lino and lightweight carpet
Exterior inserts Accepted (covered outdoor steps)
Application Domestic use (not Building Regulations compliant)
Finishes Mill Finish, Bright Polished, Satin Gold, Dark Bronze, Satin Black and Mirrorflect Gold
Insert colours Apple Green, Aura, Beige, Brown, Dark Blue, Dark Green, Dark Grey, Hazard, Mid Grey, Premium Black, Red, Sage Green, Sahara, White and Yellow

Choosing the right option

Finish. Mill Finish is plain, untreated aluminium and the most economical choice for back-of-house and service stairs. Bright Polished gives a reflective silver edge. Satin Gold, Dark Bronze and Satin Black are colour finishes that suit wood, stone-effect and dark contemporary floors. Mirrorflect Gold is a mirror-bright gold for feature and front-of-house stairs, and it costs the most.

Insert colour. Choose it against the floorcovering. For a visible step edge, pick an insert that is clearly lighter or darker than the floor. For a low-key look, match the tone of the floor. Hazard is a black-and-yellow warning insert and is priced higher than the plain colours because it is a premium insert.

Length. The 2.75m length is one of three stocked lengths (2.44m and 3.22m are the others). Pick the one that cuts into your step widths with the least waste.

Installation, use & care

Measure each step and cut the profile with a fine-toothed metal saw or a mitre saw fitted with a non-ferrous blade, then de-burr the ends. Dry-fit the nosing tight to the step edge with the riser leg down the face. Fix it by screwing through the tread leg with fixings suited to the substrate (plugs into concrete, wood screws into timber), bedding it on a suitable adhesive for a solid, rattle-free fit. Lay the floorcovering up to the back of the profile, then press the insert fully into its channel. Clean with a damp cloth and neutral detergent. Avoid abrasive pads on polished and coloured finishes.

Frequently asked questions

Is this stair nosing Building Regulations compliant?

No. It belongs to the manufacturer's domestic range and is not sold as compliant with Building Regulations. For commercial buildings, common parts or any stair where building control will inspect the step edges, choose a profile from our DDA range.

Which floors can I use it with?

Vinyl, lino and lightweight carpet. The 3.5mm gauge matches those thicknesses so the covering meets the back of the nosing flush. Medium-weight or thick carpet needs a 5mm gauge heavyweight profile.

Can I use it outside?

Yes, on covered steps, if you order it with an exterior-grade insert, which this profile accepts. The standard PVC inserts listed here are intended for internal use.

Will one 2.75m length do a whole staircase?

Each length is cut into individual step widths on site. Divide 2750mm by your step width to see how many steps you get from each length, allowing a few millimetres per cut. It is also stocked in 2.44m and 3.22m lengths if they cut with less waste.

Ordering & delivery

Each variant is one 2.75m length in your chosen finish and insert colour, with the insert supplied. Order one length per group of steps it will cut into, and allow a spare where stair widths vary. Screws and adhesive are not included. We deliver to UK mainland addresses, with lead time and carriage shown at checkout. For long runs or mixed lengths, contact us and we can plan the cutting with you.

View our complete range of stair nosing profiles — aluminium, rubber and PVC options for every application.

Delivery Information

ServiceTimeframeCost
Standard UK Delivery2 working days from dispatch£9.99

Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Overall rating: 5.0 / 5 from 6 reviews.

Customer photo review of Square Aluminium Stair Nosing 2.75m, 46mm Tread x 25mm Riser, Single PVC Insert

Needed a neat trim for our garden patio steps to blend well with the outdoor setting. The crisp edges of this one were perfect, offering not just style but durability too. After several rainy weekends, its still looking smart and robust underfoot amidst the potted plants that flank it, making it an ideal finish for our open-air dining area.

Square Aluminium Stair Nosing 2.75m, 46mm Tread x 25mm Riser, Single PVC Insert

Customer photo review of Square Aluminium Stair Nosing 2.75m, 46mm Tread x 25mm Riser, Single PVC Insert

Wasnt sure at first how this would pan out but Im glad I gave it a go. Delivery was impressively swift and the packaging kept everything snug without waste. We used it to redefine the staircase in our new home, installed on marble floors, and it arrived in pristine condition ready for the job. The stair nosing fits perfectly over sleek edges, making installations straightforward while enhancing visual appeal with its subtle presence.

Square Aluminium Stair Nosing 2.75m, 46mm Tread x 25mm Riser, Single PVC Insert

You may also like

Recently viewed