Yellow GRP Decking Strips 90mm Medium Grit Anti Slip

These yellow GRP decking strips provide a highly visible, medium-grit anti-slip surface for timber decking and other wooden walkways. Designed to be fixed directly onto existing boards, they offer a fast and effective way to upgrade slippery areas without the need for full deck replacement.

Manufactured from durable glass reinforced plastic, the strips are ideal for both domestic and commercial settings, including gardens, schools, ramps and access routes. The bright yellow finish enhances step-edge definition, helping to reduce the risk of slips and trips in all weather conditions.

Product Features

• Medium-grit anti-slip surface for reliable traction in wet and dry conditions.
• Available in 90mm depth to suit standard decking board widths and step edges.
• Choice of lengths: 800mm, 1000mm, 1200mm, 2000mm and 3000mm to suit a wide range of decking runs.
• Robust 3mm GRP construction for long-lasting performance and impact resistance.
• High-visibility yellow finish to clearly highlight walkway and step edges.
• Corrosion-resistant and rot-proof, ideal for outdoor and high-moisture environments.
• Quick and simple installation onto existing timber using suitable screws or fixings.

Key Features and Benefits

• Helps reduce slip accidents by adding a dependable, medium-grit anti-slip surface to smooth or worn timber decking.
• Saves time and cost by overlaying existing boards instead of fully replacing the deck.
• Improves visibility of walkways and edges, particularly beneficial in low light or for visually impaired users.
• Low maintenance solution that will not rust, rot or delaminate, even in exposed outdoor locations.
• Easy to cut to size on site, allowing a precise fit around posts, corners and obstacles.
• Suitable for year-round use, helping to maintain safer access routes during wet, icy or mossy conditions.

Specifications

Applications and Ideal Uses

These yellow GRP decking strips are suitable for a wide range of outdoor and semi-covered areas where extra slip resistance and visibility are required on timber surfaces.

• Domestic garden decking, patios and terraces.
• Access ramps, walkways and boardwalks in public or commercial settings.
• Steps and landings where clearer edge definition and grip are needed.
• Marinas, piers and other waterfront timber platforms.
• School, care home and leisure facility decking areas subject to frequent foot traffic.

Frequently Asked Questions

How are the GRP decking strips fixed to existing decking?

The strips are generally fixed mechanically using suitable corrosion-resistant screws through pre-drilled clearance holes. They should be positioned on clean, sound timber and secured at regular intervals along the length to ensure a firm, even fit.

Can the strips be cut to shorter lengths on site?

Yes, the GRP decking strips can be cut to size using standard tools such as a fine-toothed saw or suitable power saw. Always measure and mark carefully, support the strip while cutting, and wear appropriate safety equipment to protect from dust and sharp edges.

Are these decking strips suitable for use in coastal or very wet environments?

Yes, the glass reinforced plastic construction is corrosion-resistant and will not rust or rot, making the strips suitable for coastal, marine and high-moisture locations, provided they are correctly installed and maintained.