Need help choosing?
Talk to our team about sizes, finishes and fixing.
Retro-fitting a stair edge usually means drilling into a tread you would rather not disturb. This aluminium nosing avoids that entirely: a full-length adhesive strip on the underside bonds it straight onto a finished step, so a worn or exposed edge can be covered in an afternoon with nothing more than a mitre saw and a cloth. At 30mm across the tread and 20mm down the riser it is a slim profile, sized to tidy an edge rather than rebuild it, and it comes in five finishes including two wood effects that read as part of the floor rather than a strip laid over it.
The adhesive is applied across the full length of the flat leg, not in spots, so load is spread along the whole bond line. That matters on a laminate or LVT tread where a screw would break the wear layer and let moisture into the core. It also means no plugs, no countersinking, and no filling later if you ever lift it.
The body is extruded aluminium, so the edge takes impact without denting the way a plastic trim does, and it will not swell, split or telegraph a joint the way a timber nosing can in a heated hallway. The wood-effect and coloured finishes are applied to the metal, so the strength is the same whichever you choose.
Fine grooves run along the tread face, breaking up the surface where the foot lands. Approved Document K and BS 8300 both ask that a step nosing be visually distinguishable from the tread; matt black or bronze against a pale floor does that readily, while oak and matt brass are chosen where the priority is blending in. Decide which of those two jobs you are asking the nosing to do before you pick a finish.
Retro-fit work above all: covering a chipped or exposed step edge after laminate or LVT has been laid, tidying an edge where the flooring stops short, or protecting a newly finished stair without putting fixings through it. Common in flats and rented properties where drilling is restricted, in home offices and loft conversions, and in light commercial interiors such as small shops and consulting rooms.
| Material | Aluminium with applied finish |
|---|---|
| Overall size | 30mm tread x 20mm riser (1.18in x 0.79in) |
| Lengths | 0.9m (35.4in), 1.8m (70.9in), 2.7m (106.3in) |
| Finishes | Oak, Bronze, Matt Black, Matt Brass, Matt Silver |
| Fixing method | Self-adhesive, full-length strip |
| Channel or insert | None — grooved tread face |
| Nosing edge shape | Straight |
| Quantity per pack | 1 length |
| Suitable floor finishes | Laminate, LVT and vinyl, wood, tile |
| Not suitable for | Carpet, or any soft or loose-laid covering |
| Slip resistance rating | Not published for this line |
| Fire classification | Not published for this line |
Measure the finished width of the tread and buy the length that yields whole steps with least waste. Most UK domestic stairs are 850–900mm wide, which is why the 0.9m covers exactly one step; the longer lengths are cut down.
| Length | Domestic step (up to 900mm) | Wider step (up to 1200mm) |
|---|---|---|
| 0.9m | 1 step | — |
| 1.8m | 2 steps | 1 step |
| 2.7m | 3 steps | 2 steps |
On finish: oak and matt brass warm up beech, oak and walnut floors; matt silver suits grey LVT and most commercial schemes; matt black and bronze give the strongest visual contrast on a pale tread, which is the safer choice where a stair is used by older people or in poor light.
Cut to length with a fine-tooth blade in a mitre saw or hacksaw and file the cut end. The bond is only as good as the surface underneath, so clean the step edge with methylated spirit or a similar solvent wipe and let it dry fully — dust, polish residue and underfloor-heating warmth all weaken adhesion. Dry-fit first, peel the liner back from one end, align the nosing to the step edge, then press down firmly along the whole length. Leave 24 hours before heavy use. Clean with warm water and a neutral detergent; avoid abrasive pads, which will scuff the finish.
Will it hold on a stair in daily use?
On a clean, sound, non-porous edge, yes. On a dusty, waxed, flexing or freshly painted surface the bond will fail. Where the stair takes heavy commercial traffic, a screw-fixed nosing is the more durable choice.
Can I use it on carpeted stairs?
No. Adhesive needs a hard, smooth surface. For carpet, choose a screw-fixed nosing that clamps the carpet edge down instead.
Can it be removed later?
It can be lifted with gentle heat and a plastic wedge, but expect adhesive residue and treat removal as one-way on a delicate finish.
Is a slip resistance rating published?
No. A tested R value or pendulum figure is not published for this line. Where a specification demands a certified rating, choose a nosing supplied with test data.
Order by finish and length; count your steps first and allow for a cut at each end. Every finish and length is available to order, drawn from more than one UK supply route. Buy the whole staircase in one order where you can, as long lengths travel on a specialist carrier and one consignment costs far less than several.
View our complete range of stair nosing profiles — aluminium, rubber and PVC options for every application.
| Service | Timeframe | Cost |
|---|---|---|
| Standard UK Delivery | 2 working days from dispatch | £9.99 |
Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Overall rating: 5.0 / 5 from 8 reviews.
At this price, its remarkable how smoothly it blends with our existing entryway surface. The eucalyptus-green slate steps outside our building now look seamless with this aluminium stair nosing. Even with autumn leaves and rain muck about, the adhesives holding well against the concrete, staying sturdy after weeks of footsteps on a busy commute.
Job done without a hitch! Snagged this to cover some ugly exposed edges at our bed and breakfast, and honestly, it was good bang for the buck compared to other options out there. Pleased with how cleverly packaged everything was, keeping the shiny aluminium stair nosing in tip-top condition during delivery. Effortlessly went on over our old carpeted steps - no drilling madness needed!
Needed to sort out the worn edges on the hospital stairwell, so slapped one of these nosing strips down last weekend, and it felt like magic seeing the transformation! Sticks brilliantly to our long tiled steps under all kinds of foot traffic—Im talking bustling hospital vibe here—and still looking sharp after loads of trodden miles. Perfect for just popping over those tired tiles without the hassle of drilling or nailing in a busy setting.
Arrived swiftly in sturdy packaging. Installed the trim on our garden patio steps, and after some heavy rainfall, I was impressed with how secure it felt underfoot—no slipping whatsoever. This aluminium stair nosing adds a layer of safety where its most needed without any hassle during use.
Wasnt sure at first but the delivery was quick and the packaging kept everything secure. Setting up on my wooden stairs was a breeze, just peel and stick—didn’t even need to grab any tools! The sunlight might brighten them up nicely, but they really make a difference covering those shabby old edges. Being able to sort it myself in an afternoon with no fuss made this stair nosing feel well worth the effort.
Installed it in our busy cafe entrance, and after several months of constant foot traffic, its still holding firm. Attaching the strip to the laminate stairs was straightforward with the self-adhesive feature and didnt budge under day-to-day wear. Simple, effective, and hasn’t peeled—just whats needed for a high-use area.
Got this for the flat entrance, really makes a difference right from the first impression. The aluminium finish gives our stairs a tidy look and blends seamlessly with the concrete steps outside. Fitting the stair nosing was surprisingly simple—just pressed it down and done. Seems to handle the British weather just fine so far!
Handy product if you’re trying to spruce up your stairs! It arrived swiftly and was well-packaged, which meant I could get started right away. Cutting the aluminium stair nosing to fit each step was a breeze, making for an effortless afternoon project.
