A stair edge that has to look right in a hotel lobby or a refurbished period stairwell, and still be serviceable after a decade of traffic, is where a solid brass nosing earns its place. This slimline profile gives you a 59mm tread face and a 30mm nose in CZ108 brass, with the riser leg raked back at 83 degrees and a single 49.5mm channel carrying the anti-slip insert of your choice. Cut to your length from 700mm to 2500mm, it patinates rather than wearing through, and the insert is the part you replace.
59 x 30mm section, riser leg raked back at 83 degrees.
Why it works
The body outlasts the wear surface. Solid brass to BS EN 12164:2016 takes the impact at the step edge and holds the insert flat. The anti-slip insert sits in a replaceable channel, so a worn stair is renewed by pressing in new inserts, without lifting the nosing.
The raked back suits a raked riser. The riser leg drops 26mm below the tread plate at 83 degrees rather than square, closing the joint a square-back profile leaves open on an undercut riser.
One channel keeps the section slim. A single 49.5mm channel means less brass across the tread than a twin-channel nosing, so it reads as a trim rather than a safety fitting. The 2.5mm tail at the back gives laminate, LVT, vinyl and lino a clean edge to butt up to.
The grip is measured. Every insert has a published slip resistance value (SRV): castellated PVC 85 dry / 76 wet, Black High Grip 102 dry / 71 wet, smooth textured PVC 65 dry / 56 wet and the brass insert 82 dry / 54 wet. All sit well above the 36 the UK Slip Resistance Group rates as low slip potential.
Where it is used
Rated for medium to heavy traffic on interior stairs: hotels, pubs, clubs and cafes, shops and showrooms, schools, commercial offices and apartment buildings. It suits heritage buildings where aluminium would look wrong. Fit it directly to a concrete or timber step, or with resilient floor coverings such as LVT, vinyl, lino, rubber and woven vinyl butted up to the tail.
Specifications
Material
Solid brass, grade H/H CZ108 to BS EN 12164:2016
Nosing construction
Slimline raked back, single channel with anti-slip insert
Tread dimension
59 mm
Nose dimension
30 mm overall
Riser leg
26 mm below the tread plate, raked back at 83 degrees
700 mm to 2500 mm in all four finishes, cut to your specified length
Manufacturing tolerance
Dimensions may vary by up to +/- 5 mm
Fixing
No. 6 screws through the channel, bonded adhesive, or both
Suitability
Medium to heavy foot traffic, interior stairs
Recyclability
100% recyclable at suitable disposal centres
Choosing the right option
Finish sets the appearance of the brass body. Polished Brass is brightest; Satin Brass has the same tone with a brushed face that hides handling. Antique Brass and Antique Bronze are chemically darkened and hand finished, so tone varies slightly between batches, and they suit heritage work. Every insert is photographed in every finish, so check the image for your combination.
Insert is a separate choice from the body, and it does the anti-slip work. Castellated PVC is the ridged general-purpose option in 22 colours, with the best wet figure. Smooth Textured PVC is flatter and easier to mop. Black High Grip is aluminium oxide with the highest dry grip. The four brass inserts make the nosing read as one continuous piece of brass, with less visual contrast.
Drilling determines how it fixes. No Drilling suits bonding or your own fixing centres. Drilled Hidden Fix is drilled along the channel before dispatch, so the screw heads disappear under the insert. Drilled pieces are made to order and are not returnable unless faulty.
Visual contrast. The 59mm tread face and 30mm nose sit within the 50 to 65mm tread and 30 to 55mm riser bands that Approved Document K sets for common stairs in blocks of flats. Approved Document M treats an LRV difference of more than 30 points as adequate contrast: Polished Brass (71.45) with a Black Castellated insert (4.25) is a 67-point difference. Where a scheme calls for a full 55mm band on the riser too, ask us for our 55mm-nose brass profiles.
Installation, use and care
Set the nosing out dry and check it against the going. Fix to a clean, sound, level substrate: screw through the channel with No. 6 brass or stainless screws into suitable plugs, bed on a flooring-grade adhesive, or use both where traffic is heavy. Do not over-tighten. Press the insert in only once fixings are in and any adhesive has cured. Clean with warm water and a soft cloth, never abrasives or acidic descalers. Unlacquered brass darkens over time; leave the patina or restore it with brass polish.
Frequently asked questions
Can I order longer than 2500mm? 2500mm is the maximum in this profile, in every finish. For a wider stair, order two lengths and butt them.
Can I replace just the insert later? Yes, that is the point of the channel. Replacement 49.5mm inserts press into the fitted nosing without removing the brass.
Does it suit a square riser? The leg is raked back at 83 degrees to follow a raked or undercut riser, as the technical drawing on this page shows. For a square riser, ask us for a square-back brass profile.
Is it suitable for external steps? It is rated for interior stairs. For outdoor stairs, ask us about a GRP or external-rated nosing.
Ordering and delivery
Choose the finish, insert and drilling option, then enter your length in millimetres: the price is calculated for that exact length and updates as you type, and the nosing is cut to that measurement before dispatch. Cut lengths are non-returnable unless faulty. Ask us for a sample first if you are unsure of the insert colour or finish. Call 01282 270 010 or email sales@stairnosingsuk.co.uk to have the specification checked.
View our complete range of stair nosing profiles — aluminium, rubber and PVC options for every application.
Frequently Asked Questions
Which floor finishes and stair types does this nosing suit? Laminate, LVT, vinyl, lino, rubber and woven vinyl butt neatly up to its 2.5mm tail, and it fixes directly to a concrete or timber stair substrate where the tread is left exposed. The 83 degree raked back suits an undercut or raked riser rather than a square one.
Is it suitable for commercial or heavy traffic use? Yes. Solid CZ108 brass at 2.5mm gauge is rated for medium to heavy foot traffic on interior stairs in hotels, pubs, cafes, shops, schools, offices and apartment buildings. The wear surface is the insert, which is replaceable, so a busy stair can be brought back to specification without removing the nosing.
How is it fixed? By screw-fixing through the insert channel with No. 6 screws, by bonding with a flooring-grade adhesive, or both on heavily used stairs. Order the Drilled Hidden Fix option and we drill the fixing holes along the channel before dispatch, so the screw heads are concealed once the insert is pressed in.
Can I see the finish before committing? Yes, and we recommend it on larger jobs. Brass finishes vary between manufacturers and unlacquered brass changes as it ages, so order a sample if the nosing has to sit alongside existing handrail or door hardware, or if the insert colour is being matched to a floor.
Are slip resistance and LRV figures published? Yes. Slip resistance (SRV dry / wet): castellated PVC 85 / 76, Black High Grip 102 / 71, smooth textured PVC 65 / 56, brass insert 82 / 54. Finish LRV: Polished Brass 71.45, Satin Brass 59.55, Antique Brass 29.55, Antique Bronze 9.15. Every insert colour LRV is in the datasheet, so you can check the 30-point contrast Approved Document M asks for, e.g. Polished Brass with Black Castellated (4.25) is 67 points.
Delivery Information
Service
Timeframe
Cost
Standard UK Delivery
2 working days from dispatch
£9.99
Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Subject to the right of Consumers to return goods for refund under The Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply, We do not sell products on a trial basis. Customers are strongly advised to check suitability and specifications of products before ordering. In some instances, Customers may benefit from special price discounts. Accordingly, orders for such goods can not be cancelled and we can only return or repair Goods where they prove to be defective and the Goods are returned for repair or replacement.
In the event that Stair Nosings UK (a trading name of Express Matting Services Ltd), at its discretion unless the Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply, agrees to accept the return for credit of unwanted products, the goods must be returned with our prior written agreement within 14 days of delivery. The goods must be unopened and in perfect re-saleable condition All goods returned in these circumstances (except where the Consumer Protection Consumer Contracts (Information, Cancellation and additional charges Regulations 2013) apply. Please ensure that the product(s) you have purchased are to your specification prior to breaking the manufacturers seals. This will avoid disappointment and the product(s) being rejected, should you wish to return them.
13. Reduced price offer & Liquidation Products
13.1 Goods sold on "Reduced price offer" or "Liquidation Stock" are downgraded goods that our company is able to offer at a discount on the normal catalogue price. Stocks of goods offered as above are limited and such goods are sold subject to the following special rules. These special rules apply in addition to, and in the event of any conflict override, all of our other terms and conditions, except those terms and conditions specifically covering Consumers.
13.2 Upon receipt of an order, we will check stock availability. Until stock availability is confirmed to the customer, a contract for sale will not be created and no payment will be debited from the customer.
13.3 All goods sold by us as Reduced price offer & Liquidation Products are sold subject to the following special rules that apply in addition to our other terms and conditions.
13.4 Prices are not subject to value, cash or volume discounts
13.5 All stair nosings are custom-made to order and therefore non-returnable or refundable.
13.6 No liability is accepted for late delivery of goods or goods lost in transit
It is the customer’s responsibility to ensure the safe return of the goods.
Cost of returning goods are solely the responsibility of the customer.
All items must be returned in the original packaging. If merchandise is defective or if you have received the wrong item, Stair Nosings UK (a trading name of Express Matting Services Ltd) will either immediately replace the item or issue a credit or refund within a few days once the merchandise has been returned to them.
Henry T.
Had to sort out a timeless yet durable edging for the chic lobby of our heritage hotel, and this piece really delivered. The slim profile complements the marble surroundings beautifully while still feeling substantial underfoot. Its handling daily footfall with grace and still exudes that fresh-out-of-the-box charm.
Grace M.
Arrived securely boxed, and immediately, the quality struck me. Installed along a frequently wet granite staircase at our corporate office, it doesnt just look impressive. Underfoot stability is greatly enhanced, even in busy conditions, making this stair nosing an invaluable addition that’s both practical and durable.
Oliver M.
Wasnt sure at first, but when this little gem of a solid brass stair nosing arrived, I was taken aback by how robust it felt right out of the packaging. Everything was securely packed with each piece wrapped nicely, which I appreciated as it ensured no dings or scratches before installing it on the librarys steps. Now firmly in place, its sleek yet sturdy, standing up to its promise of elegance and durability amidst heavy footfall – just what those mosaic tiles needed!
Charlotte M.
Installed it a few months ago in our restaurants private dining area, and I’m genuinely impressed by its enduring quality. The handsome brass edge hasnt just added an elegant touch; its solid build has held up beautifully under regular foot traffic. Its nice to find something that combines style with the promise of longevity.
Lucy T.
Got this for the entrance of our bustling conference centre and it works wonders in elevating the look. The stair nosing adds a touch of classic elegance without fuss, and installing it was straightforward with no special tools needed—just an easy enhancement that transformed the entire space.
Emily H.
Top-notch accessory, though cutting the stair nosing to fit the steps in our city hall was a fussy affair. Once sorted, it seamlessly blended with the period charm, and after seeing its sturdiness during plenty of shoe traffic, Id grab another without much hesitation.
Customer Reviews
Overall rating: 5.0 / 5 from 6 reviews.
Had to sort out a timeless yet durable edging for the chic lobby of our heritage hotel, and this piece really delivered. The slim profile complements the marble surroundings beautifully while still feeling substantial underfoot. Its handling daily footfall with grace and still exudes that fresh-out-of-the-box charm.
Arrived securely boxed, and immediately, the quality struck me. Installed along a frequently wet granite staircase at our corporate office, it doesnt just look impressive. Underfoot stability is greatly enhanced, even in busy conditions, making this stair nosing an invaluable addition that’s both practical and durable.
Wasnt sure at first, but when this little gem of a solid brass stair nosing arrived, I was taken aback by how robust it felt right out of the packaging. Everything was securely packed with each piece wrapped nicely, which I appreciated as it ensured no dings or scratches before installing it on the librarys steps. Now firmly in place, its sleek yet sturdy, standing up to its promise of elegance and durability amidst heavy footfall – just what those mosaic tiles needed!
Installed it a few months ago in our restaurants private dining area, and I’m genuinely impressed by its enduring quality. The handsome brass edge hasnt just added an elegant touch; its solid build has held up beautifully under regular foot traffic. Its nice to find something that combines style with the promise of longevity.
Got this for the entrance of our bustling conference centre and it works wonders in elevating the look. The stair nosing adds a touch of classic elegance without fuss, and installing it was straightforward with no special tools needed—just an easy enhancement that transformed the entire space.
Top-notch accessory, though cutting the stair nosing to fit the steps in our city hall was a fussy affair. Once sorted, it seamlessly blended with the period charm, and after seeing its sturdiness during plenty of shoe traffic, Id grab another without much hesitation.