Bullnose Aluminium Stair Nosing 84 x 37mm

84mm tread × 37mm riserBullnoseAluminiumTwin High Grip Inserts


Price
Sale price £134.90
Inc. VAT

1 × Mill Finish, Obsidian - High Grip, 2.44 Metres (2440mm) at £134.90 (Inc. VAT) each
Goods total £134.90 (Inc. VAT) inc. VAT, before delivery

UK delivery £9.99 per order · 2 working days from dispatch. Order by 2pm (UK time) on a working day for same-day dispatch. Delivery info

In stock, ready to ship

Trustpilot five-star badge

Need help choosing?

Talk to our team about sizes, finishes and fixing.

Description

An 84 x 37mm bullnose aluminium stair nosing carrying two textured High Grip inserts. The rounded nose follows a curved step edge, and the deep 84mm tread puts two bands of grip under the foot, so it suits busy internal stairs with rounded treads: older public buildings, hospitals, care homes and hotel stairs. The 3.5mm gauge suits vinyl, lino and lightweight carpet.

Choose Obsidian or Solar inserts in any of nine aluminium finishes, in 2.44m, 2.75m or 3.22m stock lengths for cutting on site.

Why this nosing works

A rounded nose for rounded steps

Timber and pre-cast stairs often have a radiused front edge. A square nosing leaves a void behind its corner on those steps; this profile curves round the nose and down into a 37mm front leg, so it sits tight along its whole length and there is no hollow metal to dent.

Why texture beats a smooth insert

Wet shoe soles slide on smooth plastic. The High Grip insert has a textured PVC surface that keeps contact through a film of water: pendulum 95 dry and 60 wet, independently tested, against the 36 that UK Slip Resistance Group guidance treats as low slip potential. Two strips across the 84mm tread put that grip under both the descending and the ascending foot.

Obsidian or Solar

Obsidian (dark charcoal, LRV 1.80) and Solar (golden yellow, LRV 55.10) are the two colours. Pick the one that differs from your floor by more than 30 LRV points, not the one that matches it.

Twin inserts on a deep tread

Across 84mm of tread, two High Grip strips catch both the descending and the ascending footfall. For shallower treads, the single-insert 55 x 37mm bullnose is the lighter alternative.

Nine finishes

Choose the metal to suit the building. Mill Finish is the working option. The satins (Silver, Gold, Bronze and Black) and Dark Bronze hide scuffs on busy stairs. Bright Polished, Mirrorflect Silver and Mirrorflect Gold are for entrances and receptions where the stair is on show.

  • Bullnose aluminium profile, 84mm tread x 37mm riser, 3.5mm gauge
  • Twin textured High Grip inserts: pendulum 95 dry, 60 wet
  • Obsidian (LRV 1.80) or Solar (LRV 55.10)
  • 9 finishes, 3 stock lengths, for vinyl, lino and lightweight carpet

Where it's used

Rounded-edge internal stairs that carry heavy traffic: hospital and clinic stairs, care homes, hotels, older civic and school buildings and the communal stairs of flats, finished in vinyl, safety flooring, lino or light carpet. For outside steps, use the exterior-insert version of this bullnose profile.

Specifications

Profile Bullnose, double insert channel
Range Standard range
Tread (top face) 84mm
Riser (front leg) 37mm
Gauge 3.5mm
Carrier material Aluminium alloy, UK manufactured
Insert Two High Grip textured anti-slip inserts: textured PVC face on a PET base, self-adhesive, approx. 2mm thick
Slip resistance (insert) Pendulum 95 dry / 60 wet (manufacturer data, independent laboratory)
Insert colours (LRV) Obsidian 1.80, Solar 55.10
Finishes Mill Finish, Bright Polished, Satin Silver, Satin Gold, Satin Bronze, Dark Bronze, Satin Black, Mirrorflect Silver and Mirrorflect Gold
Stock lengths 2.44m (2440mm), 2.75m (2750mm), 3.22m (3220mm)
Suitable floorcoverings Vinyl, lino and lightweight carpet
Use Internal stairs; insert service range -10°C to 80°C
Fixing Screw-fix through the channel, then fit the inserts to hide the fixings; or bond with stair nosing adhesive

Choosing the right option

Insert colour. Hold a sample of your floor next to the colour chart: the insert should stand out, not blend in. Obsidian and Solar cost the same.

Finish. Mill Finish is the lowest price, then Bright Polished, then Satin Gold. Dark Bronze, Satin Black, Satin Silver and Satin Bronze share the middle price. Mirrorflect Silver comes next. Mirrorflect Gold costs the most. Satin finishes hide scuffs best on busy stairs.

Length. Stair widths are rarely identical, so measure each step at the nose and choose the length that divides into them with the smallest offcuts.

Dry, decorative stair? The same profile is available with standard PVC inserts in 15 colours.

Installation, use & care

Cut each length to the step width with a fine-toothed blade for aluminium and de-burr the ends. The step must be clean, dry and sound. Screw-fix through the channel with fixings to suit the substrate, or bed the profile on a stair nosing adhesive. Clean and dry the channels, peel the backing from the self-adhesive inserts and press them firmly into place over the fixings. Lay the floorcovering tight to the back of the profile. Clean the insert as part of the normal floor routine with a neutral detergent. Dirt packed into the texture reduces grip, and floor polish should not be applied to the insert. Abrasive pads will mark polished and coloured finishes.

Frequently asked questions

How slip-resistant is the High Grip insert?

It was tested with the pendulum method used across the UK flooring industry, at an independent laboratory: 95 dry, 60 wet. The UK Slip Resistance Group treats 36 or more as low slip potential. Keep the textured face clean to keep those figures.

Does a bullnose nosing fit a square step?

It can be fitted, but a square step leaves a small gap under the curve, so a square-edge profile is the better fit. Choose bullnose where the existing step edge is rounded.

Will it work on outdoor steps?

No. The High Grip insert is rated for internal use, with a service temperature range of -10°C to 80°C. For external steps, choose a profile with an exterior-grade insert, which is listed separately.

Why two inserts on a bullnose profile?

The 84mm tread is deep enough for two strips, so grip sits under both the descending and the ascending foot and the contrast band is wider and easier to see. Both inserts are supplied with each length.

Should the insert match the floor?

No. The insert is there to mark the edge, so it should contrast with the floor. Use Solar (LRV 55.10) on mid and dark floors and Obsidian (LRV 1.80) on pale ones, aiming for a difference of more than 30 LRV points.

Ordering & delivery

One variant equals one length of nosing in your chosen finish, insert colour and stock length, with the two inserts supplied. Screws and adhesive are not included. We deliver to UK mainland addresses; carriage and lead time are shown at checkout. Need a quantity price for a whole building? Contact us with your step count and widths.

See our full range of anti-slip stair nosings: aluminium, rubber and PVC profiles for every type of stair.

Delivery Information

ServiceTimeframeCost
Standard UK Delivery2 working days from dispatch£9.99

Orders placed by 2pm (UK time) on a working day are dispatched the same day. Orders placed after 2pm or on non-working days are dispatched the next working day. Delivery takes 2 working days from dispatch. Working days are Monday to Friday, excluding bank holidays. UK delivery costs £9.99. Contact us for international enquiries.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Overall rating: 5.0 / 5 from 6 reviews.

Customer photo review of Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

Had to sort out the entrance of our gallery, worried about slips with all those wet boots on rainy days. This piece fit right in, giving each step just enough grip without clashing with the modern vibe weve got going on. Fairly pleased; it seems robust for its thin build and hasnt let anyone down yet.

Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

Customer photo review of Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

Landed nicely ahead of schedule and didnt disappoint! Fitted this trim to our front entry where it sees a good mix of rain, family outings, and footy boots. Really impressed with how grippy the stair nosing feels underfoot, even when its been tipping down. The inserts stay secure, ensuring a solid step every time.

Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

Customer photo review of Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

Was hesitant at the start about this bit of kit, but it turned out spot on. The packaging was surprisingly robust, which meant the strip arrived in mint condition despite a few bumps in transit. After installing the stair nosing on our library steps, nothings shifted or worn out even with all those visitors milling about. Ideal since we needed something thatd keep steady no matter what walked over it.

Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

Customer photo review of Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

Got this for the stairs leading down to our beachfront patio, and its made them look super sharp while adding a solid grip even with all the sea mist around. Installing the stair nosing was a breeze, cut nicely to fit, and its holding up brilliantly under heavy sandy foot traffic — exactly the touch we needed!

Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

Customer photo review of Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

Super functional. After measuring the stairs at our local tube station and noting they needed a sturdy edge, I easily cut the stair nosing to fit perfectly along each step. It anchored down with no fuss and has handled a year of bustling commuter traffic without slipping or showing wear—it’s made me confident enough to say Id definitely purchase again for similar projects.

Bullnose Aluminium Stair Nosing 84 x 37mm, Twin Mor Grip Inserts

You may also like

Recently viewed