This smart LED driver provides a reliable low-voltage power source for stair lighting, flooring profiles and other architectural LED installations. Designed for use with compatible LED strips and stair nosing lighting, it ensures stable, flicker-free illumination throughout your run of steps or feature areas.

With integrated app and voice-control capability, this driver allows you to manage your stair and floor lighting remotely, adjust brightness, create schedules and integrate with a wider smart lighting setup. It is ideal for residential and light commercial projects where convenient, modern control and dependable performance are essential.

Product Features

• Available in two power ratings: 30W (laz030.30w) and 50W (laz050.50w) to suit different LED stair lighting runs.
• Smart control via compatible mobile app for on/off, dimming and scene setting from your phone or tablet.
• Voice-control ready when linked to a suitable smart home hub or assistant device.
• Designed for use with low-voltage LED stair nosings, floor trims and feature lighting profiles.
• High-efficiency electronic driver for stable output and reduced energy consumption.
• Compact design for discreet installation in ceiling voids, cupboards or service areas.
• Protected output to help safeguard connected LED fittings against overload and short circuit.

Key Features and Benefits

• Flexible power options: Choose 30W or 50W output to match the total load of your LED stair nosings and avoid under- or over-specifying the driver.
• Convenient smart control: Adjust your stair lighting without reaching for a switch, improving day-to-day usability and comfort.
• Enhanced safety on stairs: Reliable, flicker-free power helps keep LED stair edge lighting clear and consistent, supporting safer movement on steps.
• Energy-efficient operation: Electronic control and dimming capability help reduce electricity use, particularly in areas where lighting runs for long periods.
• Neat, hidden installation: The compact housing can be concealed away from view, leaving only the finished illuminated nosings or floor lighting visible.
• Ideal for upgrades and retrofits: Suitable for both new installations and replacing older non-smart drivers to add app and voice control to existing LED stair lighting.

Specifications

Applications and Ideal Uses

This smart LED driver is suited to a wide range of interior stair and flooring lighting projects where reliable low-voltage power and modern control are required.

• Illuminated stair nosings on internal staircases in homes, apartments and communal corridors.
• LED strip lighting integrated into floor trims, edge profiles and step markers.
• Feature lighting along landings, hallways and circulation routes for improved visibility.
• Accent lighting for home cinemas, games rooms and media areas with smart control.
• Light commercial staircases and access routes requiring controlled low-level guidance lighting.

Frequently Asked Questions

Can I use the 30W driver for any LED stair lighting installation?

The 30W (laz030.30w) driver can be used as long as the total wattage of all connected LED stair nosings or strips does not exceed 30W. For longer runs or higher loads, use the 50W (laz050.50w) version. Always allow a small safety margin below the driver’s maximum rating.

Do I need special LED strips or stair nosings to work with this smart driver?

You will need low-voltage LED products that are compatible with the driver’s output rating and type. Most low-voltage LED stair nosings and strips will be suitable, but you should always check voltage, polarity and total load against the driver specifications.

Can I still use a normal wall switch with this driver?

Yes, the driver can typically be supplied via a standard wall switch to isolate the power. The smart app and voice functions allow control while the circuit is energised, but turning off the wall switch will cut power to the driver and connected LEDs.